-
Rayndalf
- Posts: 525
- Joined: 17 May 2017, 08:01
- Location: Texas
- Main keyboard: Kinesis Model 130
- Main mouse: Logitech M-S48, Razer Viper
- Favorite switch: MX Browns
- DT Pro Member: -
11 Sep 2020, 07:37
I offered $140 a piece (so $280) for two, figure I always end up buying stuff in pairs so I might as well plan on it and save some shipping. In this case I think one would make a nice gift.
If Unicomp still has some I'll commit a crime and shove one in an industrial case (do they even fit?).
-
Jesseg
- Posts: 157
- Joined: 19 Sep 2019, 07:22
- Location: Australia
- Main keyboard: AEK1 - SKCM Salmon
- Main mouse: m720
- Favorite switch: Capacative buckling spring, Linear space invader
11 Sep 2020, 08:26
What an absolute nightmare, who bought that!? and why is the A key a giant circle???
-
Jimi14
- Posts: 110
- Joined: 20 Oct 2014, 21:40
- Location: Sundsvall, Sweden
- Main keyboard: SUH 105DA W39-463
- Main mouse: AeroCool Templarius Gladiator
- Favorite switch: Dont know (yet)
- DT Pro Member: -
11 Sep 2020, 08:30
"the compuphone 2000". I'ts a keyboard with a built in telefon allowing you to make calls directly from your computer!
https://www.tradera.com/item/340854/417 ... og-telefon
https://www.ebay.com/itm/Vintage-CompuP ... 4140695848 (US version)
- 369313942_70823478-9d9d-40c6-98cf-d36b7bcffe79.jpg (421.05 KiB) Viewed 6084 times
- 369313942_89a52a26-081c-46fa-8943-c20aa3237b13.jpg (507.62 KiB) Viewed 6084 times
- 369313942_bdee7493-9734-4d82-b738-14a19699d2dc.jpg (418.95 KiB) Viewed 6084 times
-
Findecanor
- Posts: 3975
- Joined: 01 Mar 2011, 21:43
- Location: Stockholm, Sweden
- DT Pro Member: 0011
11 Sep 2020, 11:28
All right. I didn't know the AbKey had made it to production.
-
Rayndalf
- Posts: 525
- Joined: 17 May 2017, 08:01
- Location: Texas
- Main keyboard: Kinesis Model 130
- Main mouse: Logitech M-S48, Razer Viper
- Favorite switch: MX Browns
- DT Pro Member: -
11 Sep 2020, 12:28
Rayndalf wrote: ↑11 Sep 2020, 07:37
I offered $140 a piece (so $280) for two, figure I always end up buying stuff in pairs so I might as well plan on it and save some shipping. In this case I think one would make a nice gift.
If Unicomp still has some I'll commit a crime and shove one in an industrial case (do they even fit?).
I uh...they actually took it. Not again.
-
zzxx53
- Posts: 107
- Joined: 10 Dec 2019, 17:38
- Location: US
- Main keyboard: Model F AT
- Main mouse: Roller Mouse
- Favorite switch: Capacitive Buckling Spring
11 Sep 2020, 17:29
Rayndalf wrote: ↑11 Sep 2020, 12:28
Rayndalf wrote: ↑11 Sep 2020, 07:37
I offered $140 a piece (so $280) for two, figure I always end up buying stuff in pairs so I might as well plan on it and save some shipping. In this case I think one would make a nice gift.
If Unicomp still has some I'll commit a crime and shove one in an industrial case (do they even fit?).
I uh...they actually took it. Not again.
It probably won't fit the Unicomp industrial case without modifications, given the presence of mouse buttons.
Don't forget to report back once you got them.
-
Rayndalf
- Posts: 525
- Joined: 17 May 2017, 08:01
- Location: Texas
- Main keyboard: Kinesis Model 130
- Main mouse: Logitech M-S48, Razer Viper
- Favorite switch: MX Browns
- DT Pro Member: -
11 Sep 2020, 21:04
That's pretty cool. Any idea what kind of switches it uses?
-
j0d1
- Posts: 184
- Joined: 27 Apr 2017, 16:39
- Location: Montreal
- Main keyboard: IBM Model F107
- Main mouse: Logitech M570
- Favorite switch: Buckling Spring
- DT Pro Member: 0203
-
hellothere
- Posts: 1671
- Joined: 25 May 2020, 02:20
- Location: Mesa, AZ USA
- Main keyboard: Lots
- Main mouse: CST2545W-RC
- Favorite switch: TopreAlpsHallEffectTopreAlpsHallEffectTopreAlps
12 Sep 2020, 00:39
zzxx53 wrote: ↑11 Sep 2020, 17:29
Rayndalf wrote: ↑11 Sep 2020, 12:28
Rayndalf wrote: ↑11 Sep 2020, 07:37
I offered $140 a piece (so $280) for two, figure I always end up buying stuff in pairs so I might as well plan on it and save some shipping. In this case I think one would make a nice gift.
If Unicomp still has some I'll commit a crime and shove one in an industrial case (do they even fit?).
I uh...they actually took it. Not again.
It probably won't fit the Unicomp industrial case without modifications, given the presence of mouse buttons.
Don't forget to report back once you got them.
I have one of those Unicomp industrial cases sitting right next to me. If anyone measurements or something, send me a PM.
Me aiding and abetting crime. I'm gonna be on so many lists ...
-
hellothere
- Posts: 1671
- Joined: 25 May 2020, 02:20
- Location: Mesa, AZ USA
- Main keyboard: Lots
- Main mouse: CST2545W-RC
- Favorite switch: TopreAlpsHallEffectTopreAlpsHallEffectTopreAlps
12 Sep 2020, 00:46
Jesseg wrote: ↑11 Sep 2020, 08:26
What an absolute nightmare, who bought that!? and why is the A key a giant circle???
It's their version of a perfected keyboard, with AEIOU in an arc where you can reach them easily.
https://www.ebay.com/itm/RARE-AbKey-Qwe ... 4834423509 ($35, BTW). Direct link to video is
https://vimeo.com/67786802.
Almost 100% positive it's a rubber dome. I can't find anything specifically about keyswitches.
Came out in 2005.
-
hellothere
- Posts: 1671
- Joined: 25 May 2020, 02:20
- Location: Mesa, AZ USA
- Main keyboard: Lots
- Main mouse: CST2545W-RC
- Favorite switch: TopreAlpsHallEffectTopreAlpsHallEffectTopreAlps
12 Sep 2020, 01:36
Rayndalf wrote: ↑11 Sep 2020, 21:04
That's pretty cool. Any idea what kind of switches it uses?
Well, I did some forum spelunking and found this:
Scantlin Switches. Pic was from Haata.
I'm not necessarily saying they're the same, but that's one really big case. I think they'd fit.
-
SneakyRobb
- THINK
- Posts: 583
- Joined: 03 Oct 2014, 02:41
- Location: Canada
- Main keyboard: KB-5161A, F122, Dc2014, Typeheaven, Beamspring FXT
- Main mouse: MX518 Legendary
- DT Pro Member: 0242
12 Sep 2020, 21:34
Nabbed this
- 5110.jpg (3.05 MiB) Viewed 5650 times
-
Rayndalf
- Posts: 525
- Joined: 17 May 2017, 08:01
- Location: Texas
- Main keyboard: Kinesis Model 130
- Main mouse: Logitech M-S48, Razer Viper
- Favorite switch: MX Browns
- DT Pro Member: -
12 Sep 2020, 22:43
hellothere wrote: ↑12 Sep 2020, 01:36
Well, I did some forum spelunking and found this:
Scantlin Switches. Pic was from Haata.
I'm not necessarily saying they're the same, but that's one really big case. I think they'd fit.
What a strange design, I wonder how they feel.
SneakyRobb wrote: ↑12 Sep 2020, 21:34
Nabbed this
5110.jpg
I can't imagine the excitement.
-
Redmaus
- Gotta start somewhere
- Posts: 2396
- Joined: 04 Feb 2015, 19:19
- Location: Near Dallas, Texas
- Main keyboard: Unsaver | 3276 | Kingsaver
- Main mouse: Kensington Slimblade
- Favorite switch: Capacitative Buckling Spring
- DT Pro Member: -
-
Contact:
12 Sep 2020, 22:51
SneakyRobb wrote: ↑12 Sep 2020, 21:34
Nabbed this
5110.jpg
Along with the massive disk drive
Copped it
-
j0d1
- Posts: 184
- Joined: 27 Apr 2017, 16:39
- Location: Montreal
- Main keyboard: IBM Model F107
- Main mouse: Logitech M570
- Favorite switch: Buckling Spring
- DT Pro Member: 0203
-
Redmaus
- Gotta start somewhere
- Posts: 2396
- Joined: 04 Feb 2015, 19:19
- Location: Near Dallas, Texas
- Main keyboard: Unsaver | 3276 | Kingsaver
- Main mouse: Kensington Slimblade
- Favorite switch: Capacitative Buckling Spring
- DT Pro Member: -
-
Contact:
13 Sep 2020, 01:17
You'd think for that much the dude could at least rotate the pictures properly
-
darkcruix
- Posts: 848
- Joined: 16 Jan 2018, 21:38
- Location: Germany
- Main keyboard: Brand New Model F F77 Keyboard
- Main mouse: Logitech MX Master
- Favorite switch: Ellipse version of Buckling Spring / BeamSpring
- DT Pro Member: 0209
13 Sep 2020, 02:05
SneakyRobb wrote: ↑12 Sep 2020, 21:34
Nabbed this
5110.jpg
Oh, I am soooo jealous
-
xxhellfirexx
- Posts: 453
- Joined: 04 Jul 2017, 06:24
- Location: Canada
- DT Pro Member: -
-
Rayndalf
- Posts: 525
- Joined: 17 May 2017, 08:01
- Location: Texas
- Main keyboard: Kinesis Model 130
- Main mouse: Logitech M-S48, Razer Viper
- Favorite switch: MX Browns
- DT Pro Member: -
13 Sep 2020, 22:01
Definitely worth the $140 a piece.
The one I opened was definitely NOS, as expected the seller just taped the two boxes together and shipped them, but other than the extra tape even the boxes look new.
Unfortunately the cable had split on the one I opened. Anyone had luck internally converting one (AT -> USB and Serial -> USB and both USB to a small USB hub)?
-
Attachments
-
- 20200913_144539.jpg (2.71 MiB) Viewed 5385 times
-
- 20200913_144531.jpg (2.96 MiB) Viewed 5385 times
-
dcopellino
- Posts: 358
- Joined: 06 Jun 2018, 17:49
- Location: Italia - Napoli
- Main keyboard: IBM 4704 F400 brushed chrome
- Main mouse: Logitech laser wired
- Favorite switch: Buckling spring
- DT Pro Member: 0229
-
Contact:
13 Sep 2020, 22:12
May i suggest some sugru (Google it, if you don't know what I am speaking of) to fix the frayed cable.... Anyway prices are rising, even if nos, IMHO.
-
Rayndalf
- Posts: 525
- Joined: 17 May 2017, 08:01
- Location: Texas
- Main keyboard: Kinesis Model 130
- Main mouse: Logitech M-S48, Razer Viper
- Favorite switch: MX Browns
- DT Pro Member: -
13 Sep 2020, 22:36
dcopellino wrote: ↑13 Sep 2020, 22:12
May i suggest some sugru (Google it, if you don't know what I am speaking of) to fix the frayed cable.... Anyway prices are rising, even if nos, IMHO.
Prices probably
were rising, but this seller takes offers and has "more than 10 available" so I have no idea. I'll keep the second one NIB, but I'd love to have one I can easily use with modern systems.
-
dcopellino
- Posts: 358
- Joined: 06 Jun 2018, 17:49
- Location: Italia - Napoli
- Main keyboard: IBM 4704 F400 brushed chrome
- Main mouse: Logitech laser wired
- Favorite switch: Buckling spring
- DT Pro Member: 0229
-
Contact:
14 Sep 2020, 16:26
Rayndalf wrote: ↑13 Sep 2020, 22:36
dcopellino wrote: ↑13 Sep 2020, 22:12
May i suggest some sugru (Google it, if you don't know what I am speaking of) to fix the frayed cable.... Anyway prices are rising, even if nos, IMHO.
Prices probably
were rising, but this seller takes offers and has "more than 10 available" so I have no idea. I'll keep the second one NIB, but I'd love to have one I can easily use with modern systems.
Good for you. On my side i'am done with the ibm M13s
And I must say that the keyswitches manufactured by maxi switch are not bad at all even if they're slightly different from model ms", less vibrant and pingy as if the pvc of the barrel plate with the keyswitches and the back plate all together were more compact and sturdy both on the tactile feeling and the sound hearing. Happy clicking and trackpointing.
-
gnhuy91
- Posts: 12
- Joined: 25 Apr 2019, 10:33
- Location: Vietnam
- Main keyboard: tofu
- Main mouse: g502
- Favorite switch: zealios
14 Sep 2020, 16:35
Not a bargain, the keyboard alone went for ~250usd on a bid 2-3 months ago, so it might be around that price.
-
M9HM
- Posts: 86
- Joined: 26 Aug 2020, 01:22
- Location: Spain
- Main keyboard: Ibm model m
- Main mouse: Mx master 1
- Favorite switch: buckling springs
14 Sep 2020, 17:54
It looks in fantastic condition though, and its a beautiful keyboard, that's so I thought someone may find it interesting.
-
Redmaus
- Gotta start somewhere
- Posts: 2396
- Joined: 04 Feb 2015, 19:19
- Location: Near Dallas, Texas
- Main keyboard: Unsaver | 3276 | Kingsaver
- Main mouse: Kensington Slimblade
- Favorite switch: Capacitative Buckling Spring
- DT Pro Member: -
-
Contact:
14 Sep 2020, 18:13
laptop hahahaha that's hilarious
-
Yasu0
- Posts: 209
- Joined: 08 Sep 2020, 10:40
- Location: hawaii
- Main keyboard: dull grey ibm selectric
- Main mouse: vertical ergonomic old man mouse
- Favorite switch: unicomp m, spring and rubber in perfect harmony.
14 Sep 2020, 19:30
Last edited by
Yasu0 on 15 Sep 2020, 20:14, edited 1 time in total.