Face U/MX-mini U replica, acrylic/alu plate, KEEP ORDERING

[LechnerDE]

When is the payment deadline?

I probably won't be able to pay before next saturday. Is that still ok?

Next saturday? 12 or 19 Jul?

Saturday the 12th. Would that be okay?

If not I'd have to make a lot of arrangements to pay earlier. I'd rather not do that, but I also don't want to miss out on this GB!

[Shinryuu]

the plate I'm sure adds some kind of stability, but again, on a poker case the screws hold the PCB not the plate. So...

the real advantage of having a plate would be to be able to use costar stabs instead of the smooshy cherry, but these plates are not costar compatible.

anyway if tinnie has sold out the alu plates I can have some laser cut later (with costar compatibility).

Oh, I ordered 2 acrylic plates to try them out.. I prefer typing on a board with a plate. Well, you better go to make some alu ones

[Zentaaa]

I wish there was an option for mx mini u alu plates

[matt3o]

I wish there was an option for mx mini u alu plates

they will come. no worries

[Zentaaa]

I wish there was an option for mx mini u alu plates

they will come. no worries

Really?

Ps. Tinnie I know im the most annoying person in this gb but any eta on the acrylic case sample IM VERY EXCITED as you can probably tell x)

[Muirium]

Matt makes his own plates. Especially once his CNC machine is up and running.

[Zentaaa]

Matt.... Your a beast, Now make some plates haha

[Medowy]

[vsev]

Paid invoice !

[YUIOP]

Paid my invoice as well.

Question, will these take thru-hole diodes in addition to smds? I'm asking because the sample pic in OP has no holes for diodes.

[tinnie]

No thru-holes diodes.

[DanielT]

But the PCB has the SMD diodes soldered, right ?

[YUIOP]

Does it? Then it's a moot point.

I have a bunch of thru-holes but no smds. If it doesn't come with them pre-soldered, I will have to buy some.

[matt3o]

last time I checked you only needed to add switches. thru-hole diodes are the easiest to solder btw and you can get 100 for 2 euros.

[plasticchair]

soldering smds however...

Nothing I should do with my $5 iron

[scottc]

If this doesn't have the SMD diodes already soldered, I might have to reconsider my order... but it does, right? I thought the point of this was that you only needed to add switches?

[pasph]

So what would i need to put together a FaceU?

How much is the case gonna be?

And when do orders close?

SL89: Switches, stabs, keycaps, a case and a usb cable and you're good to go. Case for face u is not available.

Seems that all will come presoldered

[plasticchair]

Even the resistors for possible LEDs?

[tinnie]

Everything is soldered. You just need solder switches and LEDs (if possible) to make these fuckers work-

[Zentaaa]

Tinnie i know i am very annoying but any eta on the acrylic cases?

[tinnie]

Zentaaa: I will ahve sample soon.

[Zentaaa]

Okay

[collector of junk]

paid (please check I did it right)

thanks

[SL89]

Of course IRL stuff gets in the way of this project :/

thank you for voiding my order Tinnie

at least there is the Red Scarf II to look forward to!

[macmakkara]

Paid. Then just waiting.

[feizor]

Hey tinnie, can you please confirm if the faceu alu plate supports 1.75u right shift, winkeyless and stepped capslock?

Thanks!

[Xenderwind]

Sent you a pm tinnie, let me know if its possible. If not I can figure something out.

[tinnie]

Hey tinnie, can you please confirm if the faceu alu plate supports 1.75u right shift, winkeyless and stepped capslock?

Thanks!

Yes.

[tinnie]

Sent you a pm tinnie, let me know if its possible. If not I can figure something out.

Done.

[Laser]

Paid!