HyperMicro / Deadline: 2015-03-17 / -32767 days to go! :o

[7bit]

¡¡¡BUMP!!!

[lolpes]

I ordered, hope i made it in time :p, didnt see it posted here, but where can i order the stabs? I ordered the ansi400M layout, can anyone help me and teel wich stabs should i get?

[7bit]

You need platemounted ones, that will be available a little later.


The PCB and plate production will take a few weeks, anyway.

[7bit]

I've added stabilisers (plate mount) to the pricelist:

Code: Select all

Order-ID      | Price |  Pcs|Description
HYPER/MICRO/P1| 20 EUR|    1|Prototype PCB (5x12)
TEENSY20      | 22 EUR|    1|Teensy 2.0 controller <--- you need this for the HyperMicro!
TEENSY31      | 28 EUR|    1|Teensy 3.1 controller
TEENSYPP      | 32 EUR|    1|Teensy++ 2.0 controller

Code: Select all

Order-ID      | Price |  Pcs|Description
DIODE10       |  1 EUR|   10|1N4148 diodes (10)
DIODE100      |  3 EUR|  100|1N4148 diodes (100) <--- you need about these many for 2 HyperMicro-s!
DIODE150      |  4 EUR|  150|1N4148 diodes (150)
DIODE500      |  8 EUR|  500|1N4148 diodes (500)
DIODE1K       | 12 EUR| 1000|1N4148 diodes (1k)
DIODE2K       | 23 EUR| 2000|1N4148 diodes (2k)
DIODE5K       | 55 EUR| 5000|1N4148 diodes (5k)
DIODE10K      |105 EUR|10000|1N4148 diodes (10k)

Code: Select all

Order-ID      | Price |  Pcs|Description
STAB200       |  2 EUR|    1|Cherry plate mount stab 2-2.75u
STAB203       |  5 EUR|    3|Cherry plate mount stab ISO-TKL
STAB204       |  6 EUR|    4|Cherry plate mount stab ANSI-TKL
STAB206       |  8 EUR|    6|Cherry plate mount stab ISO-102
STAB207       |  9 EUR|    7|Cherry plate mount stab ANSI-101
STAB400       |  2 EUR|    1|Cherry plate mount stab 4u
STAB625       |  2 EUR|    1|Cherry plate mount stab 6.25u
STAB700       |  2 EUR|    1|Cherry plate mount stab 7u

Code: Select all

Order-ID             |Price |Description
HYPER/MICRO/7BIT     |10 EUR|normal_plate
HYPER/MICRO/ANSI100  |10 EUR|normal_plate
HYPER/MICRO/ANSI400  |10 EUR|normal_plate
HYPER/MICRO/ANSI400M |10 EUR|normal_plate
HYPER/MICRO/ANSI625  |10 EUR|normal_plate
HYPER/MICRO/ANSI700  |10 EUR|normal_plate
HYPER/MICRO/SYM100   |10 EUR|normal_plate
HYPER/MICRO/SYM400   |10 EUR|normal_plate
HYPER/MICRO/SYM700   |10 EUR|normal_plate
HYPER/MICRO/7BITH    |10 EUR|plate_with_trackpoint-hole
HYPER/MICRO/ANSI100H |10 EUR|plate_with_trackpoint-hole
HYPER/MICRO/ANSI400H |10 EUR|plate_with_trackpoint-hole
HYPER/MICRO/ANSI400MH|10 EUR|plate_with_trackpoint-hole
HYPER/MICRO/ANSI625H |10 EUR|plate_with_trackpoint-hole
HYPER/MICRO/ANSI700H |10 EUR|plate_with_trackpoint-hole
HYPER/MICRO/SYM100H  |10 EUR|plate_with_trackpoint-hole
HYPER/MICRO/SYM400H  |10 EUR|plate_with_trackpoint-hole
HYPER/MICRO/SYM700H  |10 EUR|plate_with_trackpoint-hole

I still need to add legs for the Teensy ...

Sample order to be submitted as pm to user CherryMX:

HYPER/MICRO/P1
HYPER/MICRO/ANSI700H
STAB700
TEENSY20
MXCLEAR/NW 45
MXGREY/NW
DIODE100
ypur e-mail address
ADDRESS
your shipping address
with name
street,
town and
country

[lolpes]

hey how can i change my order to include the stabs? and also, how can i update my shipping address? the one i gave is all messed up in the order email due to punctiation signs like "~" :/ need to update it to all caps...

[7bit]

Just submit a new order for the stabs. They will be added to your existing order.


The only trouble with your address is that you sent it in one line and it seems the name is missing:

<insert name here>
Xxx xxx Xx\~xxx, n$^{\underline{\mathsf{o}}}$221B
Xxxx\'xxxx, X\~xx Xxxxx
Xxxxx
Xxxxx

Anything else comes out perfectly!!!!


Hint:

Spoiler:

LaTeX rulez teh world!!!

[wlhlm]

Wait, are you parsing the orders with Latex?

[7bit]

Wait, are you parsing the orders with Latex?

No, the address labels are typeset in LaTeX.

[wlhlm]

Wait, are you parsing the orders with Latex?

No, the address labels are typeset in LaTeX.

Ah, I was a bit confused there.

[lolpes]

hey again, sorry to bother again, i ordered the ansi400MH plate and wanted to change it to ansi625H, but endend up adding it to the existing order instead of replacing it, how can i solve this?

[chzel]

Send

Code: Select all

HYPER/MICRO/ANSI400MH 0

to the bot to change the quantity to zero.

[lolpes]

Send

Code: Select all

HYPER/MICRO/ANSI400MH 0

to the bot to change the quantity to zero.

Thanks

[7bit]

2 more days!

[flabbergast]

Roll... roll... roll with the deadline...

[scottc]

[7bit]

I've got to finetune it a bit and also did not get a response from the plate manufacturer ...

[SL89]

Are the PCBs and plates made in your neck of the woods?

[7bit]

About 350-600km away.

[SL89]

Ah ok

[jonlorusso]

I harvested a trackpoint module from an old thinkpad keyboard. It looks pretty similar to pictures I've seen posted here. I still need to figure out how to dremel these keycaps without making a mess. Also, I don't fully understand how a stem gets attached to it. Does it just fit over the top similar to the rubber cap/nub?

[tedk84]

am i still able to participate? sure, right ?

[lolpes]

Hey 7bit, i still have my invoice unpaid and would like to pay it today, but i don't know if i have exceeded the 7 day period or not, can you tell me if i can still pay it and have my order processed or do i have to make another order?

[7bit]

Hey 7bit, i still have my invoice unpaid and would like to pay it today, but i don't know if i have exceeded the 7 day period or not, can you tell me if i can still pay it and have my order processed or do i have to make another order?

The order is still there.

[7bit]

After the deadline, these are the plates that are available:

Code: Select all

Order-ID             |Ordered|Available|Price |Description
HYPER/MICRO/P1       |     12|       10|20 EUR|Prototype PCB  (4x12; req. TEENSY20)
HYPER/MICRO/7BITH    |      3|        6|10 EUR|plate with trackpoint-hole
HYPER/MICRO/SYM100H  |      8|        5|10 EUR|plate with trackpoint-hole
HYPER/MICRO/SYM700H  |      1|        9|10 EUR|plate with trackpoint-hole
HYPER/MICRO/ANSI100H |      1|        9|10 EUR|plate with trackpoint-hole
HYPER/MICRO/ANSI400H |      2|        8|10 EUR|plate with trackpoint-hole
HYPER/MICRO/ANSI700H |      1|        9|10 EUR|plate with trackpoint-hole

I will order 25 PCBs and 10 of each plate, except for HYPER/MICRO/SYM100H (15).

[Medowy]

Is it too late to get in?

[7bit]

I posted the list of what is still available!

[Medowy]

I posted the list of what is still available!

Awesome. I will place an order then.

[SL89]

I realized i never actually placed my order so i switched to ANSI400H

[lolpes]

I have tried again and again today to pay for my order, but my bank won't seem to make the transfer...will try again tomorrow with someone from the bank itself, if not, i have tried to pay in paypal, i don't mind the extra 3.74 if i can finnaly pay for this :p but when i select the amount asked on my order : 98.00 USD the conversion goes to 95.96 euros, and my invoice with paypal fees(3.74) based on current conversion rates is 90.74. Based on this how do i proceed? do i pay an amount that converts from paypal into 90.74 euros(92.7 USD) or do i have to pay the full 95.96 euros? because for the second choice i would be spending almost 10 euros on paypal fees alone and it is a bit too much.

It is going to be my first mechanical keyboard, and also my first purchase in here so sorry if i may seem a noob at this :p

[7bit]

If you pay by PayPal, you need to pay in USD. Your bank does the conversion.

But you are in a Euro-country, why not pay in your own currency directly?