It would be nice to even just get a simple status update.HyperMicro / Deadline: 2015-03-17 / -32767 days to go! :o
-
scottc
- ☃
- Location: Remote locations in Europe
- Main keyboard: GH60-HASRO 62g Nixies, HHKB Pro1 HS, Novatouch
- Main mouse: Steelseries Rival 300
- Favorite switch: Nixdorf 'Soft Touch' MX Black
- DT Pro Member: -
Seriously 7bit, what is the status on the PCBs? I'm getting a bit bored of waiting and honestly considering just getting a different board instead... It would be nice to even just get a simple status update.
It would be nice to even just get a simple status update.-
wlhlm
- ~
- Location: Dresden, Germany
- Main keyboard: Realforce 87U 55g
- Main mouse: Logitech G500
- Favorite switch: 55g Topre
- DT Pro Member: -
- Contact:
Those who chose the SYM700/ANSI700 layout: What key/layer mapping will you be going for?
-
flabbergast
- Location: Southampton, UK
- DT Pro Member: 0120
- Contact:
Hi 7bit - I would like to switch from SYM100H to ANSI100H plate in my order. I just wanted to check if it's OK before I send a PM to the bot, because I think there are only 3 SYM100H ordered, and I don't want to drop the SYM100H count too low to be feasible to order...
-
aaron
- Location: Germany (Karlsruhe)
- Main keyboard: Noppoo Choc Mini
- Main mouse: Roccat Kova[+], CST
- Favorite switch: MX-Brown mit O-Rings
- DT Pro Member: -
- Contact:
Any status update on this?
-
flabbergast
- Location: Southampton, UK
- DT Pro Member: 0120
- Contact:
I've just received a package from 7bit, so he is still alive... sorting caps.
-
wlhlm
- ~
- Location: Dresden, Germany
- Main keyboard: Realforce 87U 55g
- Main mouse: Logitech G500
- Favorite switch: 55g Topre
- DT Pro Member: -
- Contact:
Muirium's HyperMicro pictures motivated me to take a look at this keyboard again.
First, I started working on a layout and then tried to find the appropriate caps from Round 5a.
Layouts
At this point, the layouts are purely theoretical and I'm sure I will make changes once I can try them in practice.
The most interesting base layout for me is SYM100, unfortunately the shortest spacebar (convex) SP can make is 4u and because I haven't tried SA profile before and I'm not sure how a concave SA spacebar feels, I also made a layout based on SYM400.
I borrowed the Upper and Lower concept from Jack Humbert's ortholinear boards. Basically Fn0 activates the upper layer (top legends) and Fn1 activates the lower layer (bottom legends). Another interesting addition is the LockLayer toggled with FnL, which stays on permanently until FnL is pressed again. I hope to combine it with an actual locking switch. Currently, only the arrow keys are on the Lock layer.
SYM400
http://www.keyboard-layout-editor.com/# ... dc7b0c6ebf
SYM100
http://www.keyboard-layout-editor.com/# ... 05e91383ce
Keycaps
I tried to find fitting Round 5a keycap for my layouts. Unfortunately, due to the sculpted profile, some keys are not available for the correct rows. What I'm missing are R2 1u Escape and Backspace, R3 1u Tab, R4 1u Shift.
First, I started working on a layout and then tried to find the appropriate caps from Round 5a.
Layouts
At this point, the layouts are purely theoretical and I'm sure I will make changes once I can try them in practice.
The most interesting base layout for me is SYM100, unfortunately the shortest spacebar (convex) SP can make is 4u and because I haven't tried SA profile before and I'm not sure how a concave SA spacebar feels, I also made a layout based on SYM400.
I borrowed the Upper and Lower concept from Jack Humbert's ortholinear boards. Basically Fn0 activates the upper layer (top legends) and Fn1 activates the lower layer (bottom legends). Another interesting addition is the LockLayer toggled with FnL, which stays on permanently until FnL is pressed again. I hope to combine it with an actual locking switch. Currently, only the arrow keys are on the Lock layer.
SYM400
- SYM400
- SYM400.png (16.01 KiB) Viewed 10223 times
SYM100
- SYM100
- SYM100.png (16.51 KiB) Viewed 10223 times
Keycaps
I tried to find fitting Round 5a keycap for my layouts. Unfortunately, due to the sculpted profile, some keys are not available for the correct rows. What I'm missing are R2 1u Escape and Backspace, R3 1u Tab, R4 1u Shift.
-
flabbergast
- Location: Southampton, UK
- DT Pro Member: 0120
- Contact:
I was wondering if it would be possible/useful to add also a "backplate" to 7bit's buy? I mean top plate is fine, but until there's a nice case available, I would welcome a "blank" plate that could be used as a bottom of the keyboard, just using some spacers and screws jdcarpe/ortholinearkeyboards - style.
Other than this, did stabs disappear from 7bit's / CherryMX/bot's list? I don't know where else would I get a 4u stab...
Finally - WHERE ARE THE PCBs?
Other than this, did stabs disappear from 7bit's / CherryMX/bot's list? I don't know where else would I get a 4u stab...
Finally - WHERE ARE THE PCBs?
-
aaron
- Location: Germany (Karlsruhe)
- Main keyboard: Noppoo Choc Mini
- Main mouse: Roccat Kova[+], CST
- Favorite switch: MX-Brown mit O-Rings
- DT Pro Member: -
- Contact:
That must be a complicated production.... Any update on this?
-
aaron
- Location: Germany (Karlsruhe)
- Main keyboard: Noppoo Choc Mini
- Main mouse: Roccat Kova[+], CST
- Favorite switch: MX-Brown mit O-Rings
- DT Pro Member: -
- Contact:
Thats my last 7bit BG, for sure .... :/
-
7bit
- Location: Berlin, DE
- Main keyboard: Tipro / IBM 3270 emulator
- Main mouse: Logitech granite for SGI
- Favorite switch: MX Lock
- DT Pro Member: 0001
7bot wrote:PCB ARE ON WAY TO ME\nGET TRACKING NUMBER IN -1 DAYS.\nEOT
-
scottc
- ☃
- Location: Remote locations in Europe
- Main keyboard: GH60-HASRO 62g Nixies, HHKB Pro1 HS, Novatouch
- Main mouse: Steelseries Rival 300
- Favorite switch: Nixdorf 'Soft Touch' MX Black
- DT Pro Member: -
I'm feeling a bit dubious about this whole ordeal... did you actually order the PCBs 7bit?
You also said you ordered them in March: http://deskthority.net/post219420.html#p219420
But you obviously must not have done so in this instance, since it's now almost October and they're not here.
If you really haven't ordered them, can I please just get a refund for my PCB + Teensy? I've been waiting for my Round 5a refund for several weeks now too.
You also said you ordered them in March: http://deskthority.net/post219420.html#p219420
But you obviously must not have done so in this instance, since it's now almost October and they're not here.
If you really haven't ordered them, can I please just get a refund for my PCB + Teensy? I've been waiting for my Round 5a refund for several weeks now too.
-
7bit
- Location: Berlin, DE
- Main keyboard: Tipro / IBM 3270 emulator
- Main mouse: Logitech granite for SGI
- Favorite switch: MX Lock
- DT Pro Member: 0001
Not sure what the problem was, but since about 3 weeks they told me they are shipped and now I got a tracking number that says they shipped only a few days ago.
-
Muirium
- µ
- Location: Edinburgh, Scotland
- Main keyboard: HHKB Type-S with Bluetooth by Hasu
- Main mouse: Apple Magic Mouse
- Favorite switch: Gotta Try 'Em All
- DT Pro Member: µ
You got 7bit!
Deadline: right now!!!
Deadline update: no, it's next month.
Shipnow!
These other orders that are not yours and you don't care about have shipped already.
Leftovers on sale! Order more!
Your stuff is still nowhere in sight.
Then add an inscrutable bot that you cannot understand because it's not your bot to know. And see what we're always complaining about.
Deadline: right now!!!
Deadline update: no, it's next month.
Shipnow!
These other orders that are not yours and you don't care about have shipped already.
Leftovers on sale! Order more!
Your stuff is still nowhere in sight.
Then add an inscrutable bot that you cannot understand because it's not your bot to know. And see what we're always complaining about.