HyperMicro / Deadline: 2015-03-17 / -32767 days to go! :o

[scottc]

Can we see the tracking number please, 7bit? It would provide a bit of much-needed transparency.

[scottc]

Can we see the tracking number please, 7bit? It would provide a bit of much-needed transparency.

Buuuuuuuuuuuump for this please.

[scottc]

Right, so it's been a few days since I requested the tracking number. Since 7bit is ignoring this request, it's likely that the PCBs were probably never ordered, just like in March. If this is really the case, why lie about it?

7bit, please just give me a refund for the PCB + Teensy. The bot won't let me cancel the items so I need you to do it. Please return the money plus what I'm owed from my R5a payments together.

[Muirium]

Right, so it's been a few days since I requested the tracking number. Since 7bit is ignoring this request, it's likely that the PCBs were probably never ordered, just like in March. If this is really the case, why lie about it?

7bit, please just give me a refund for the PCB + Teensy. The bot won't let me cancel the items so I need you to do it. Please return the money plus what I'm owed from my R5a payments together.

Bummer.

How would you fancy my prototype Hypermicro? I have a 3D printed case, but I haven't actually gotten it working. Something to do with a missing internal usb cable and my general malaise towards MX. It's already fitted with MX whites and a Teensy 2. Although I think I did some crafty (ie. dumb) pin rerouting with little cables because… don't recall… to make it work with Soarer's controller firmware most likely. I literally cannot handle TMK.

[ne0phyte]

I think it's less about not having the keyboard yet and more about all the delays. I pre-ordered (well, the IC thread) a HyperMicro PCB and plate well over 2 years ago and at some point just cancelled everything.
If he really got a tracking number why not post it? He's online every day but apparently ignores this thread.

It would provide a bit of much-needed transparency.

[macmakkara]

Right, so it's been a few days since I requested the tracking number. Since 7bit is ignoring this request, it's likely that the PCBs were probably never ordered, just like in March. If this is really the case, why lie about it?

7bit, please just give me a refund for the PCB + Teensy. The bot won't let me cancel the items so I need you to do it. Please return the money plus what I'm owed from my R5a payments together.

Bummer.

How would you fancy my prototype Hypermicro? I have a 3D printed case, but I haven't actually gotten it working. Something to do with a missing internal usb cable and my general malaise towards MX. It's already fitted with MX whites and a Teensy 2. Although I think I did some crafty (ie. dumb) pin rerouting with little cables because… don't recall… to make it work with Soarer's controller firmware most likely. I literally cannot handle TMK.

Mu. Im interested in those. It just depends on what you have in mind for pricing.

[7bit]

You won't believe what came in today!


The package has been handed over to a neighbor and today I got it.


It's extremely heavy, BTW.


I will post pictures in a moment.


I remember there where 3 people in for testing them. Please let me know who these where.

[DanielT]

I was one of the qHack testers

[scottc]

Okay, if they arrived today then my rant was obviously premature. I apologise for jumping to conclusions, 7bit.

I think the qHACK testers were Mu, matt3o, DanielT and myself.

[7bit]

.

[gogusrl]

Okay, if they arrived today then my rant was obviously premature. I apologise for jumping to conclusions, 7bit.

I think the qHACK testers were Mu, matt3o, DanielT and myself.

which one of you can I bribe to get the qhack pcb ?

[aaron]

And what about the aluminium plates? I've ordered

HYPER/MICRO/SYM100H
HYPER/MICRO/SYM100

on 02.03. ... still waiting.

[malcomkern]

Are the HyperMicros ready for shipment or is there some deadline involved

[7bit]

I still don't have the plates.

[malcomkern]

Bummer, I could do with a "small" project

[aaron]

I still don't have the plates.

Any vague estimates on this? 2015 or 2016?

[7bit]

My problem is that kicad does not produce the DXF-output that is needed. I can't repair it, so I need to make the DXF myself. But then, there is Round 5a and those new legends. In order to not delay Round 5a, I need to send all SVG graphics to SP at 2 November 2015. When I've finished that, I can write the tool-kit to make the DXF-files.

[ne0phyte]

My problem is that kicad does not produce the DXF-output that is needed. I can't repair it, so I need to make the DXF myself. But then, there is Round 5a and those new legends. In order to not delay Round 5a, I need to send all SVG graphics to SP at 2 November 2015. When I've finished that, I can write the tool-kit to make the DXF-files.

Probably the same problem I'm fighting haha. It only outputs filled (double), interpolated lines instead of the raw polygon for the cuts and eco layers, right?
That used to work but neither the 2015 stable nor the latest nightly build let me select "line mode" in the DXF export.

[jonlorusso]

I want a PCB!!!!

[gogusrl]

qHACK qHACK qHACK qHACK qHACK qHACK qHACK qHACK qHACK qHACK qHACK qHACK qHACK qHACK qHACK qHACK qHACK qHACK

[Muirium]

Will you be a good boy and put a Trackpoint in it as 7bit intended?

[gogusrl]

ofcourse.

[Muirium]

You're braver than I am then! Let's see if he'll swap us around. I've still got the HyperMicro to play with after all.

[scottc]

HYPER!

MICRO!

SHIPNOW!

At this rate, I'll have completed my THKB before my HyperMicro is even sent.

[andrewjoy]

screw the hyper micro

where is my hyper 7 !

[scottc]

The Micro has already been produced though and we've been waiting for ages...

[scottc]

It finally arrived!

[gogusrl]

qHACK ?

[scottc]

HyperMicro AND qHack.

[gogusrl]

I'm still waiting on 7bit to acknowledge the fact that Murium has passed on the qHack for me so I can start with the SHIP NOW spam.