F104+SSK+122+62+77+50+Ergo orders now open! New Kishsaver+Industrial Model F Keyboards

Ellipse

05 Feb 2016, 02:40

The Brand New Model F orders continue coming in - we just crossed the $40,000 mark in orders today! Very impressive for the first week! I was expecting about $100,000 based on current order interest over the entire 5 month period so this is a good start to the project.

Interesting t!ng! I also noticed another German language tech site article:

http://www.pcgameshardware.de/Tastature ... n-1185232/

User avatar
Nuum

05 Feb 2016, 11:00

Any news about the PayPal issue? I'm a little hesitant to order because of this.

andrewjoy

05 Feb 2016, 11:52

Nuum wrote: Any news about the PayPal issue? I'm a little hesitant to order because of this.
Indeed, i don't want to pay that invoice until this is sorted.

User avatar
gnarlsagan

06 Feb 2016, 02:35

andrewjoy wrote:
Nuum wrote: Any news about the PayPal issue? I'm a little hesitant to order because of this.
Indeed, i don't want to pay that invoice until this is sorted.
Thirded. I'd also like an update on the PayPal situation, although it may not be too serious if his account is still accepting payments.

Either way, I shall remain steadfast in my faith in Ellipse.

Ellipse

06 Feb 2016, 03:12

nuum, andrew, and gnarl I am confident PayPal will take care of this issue. I have provided a written explanation and have escalated the issue to their Executive Escalations team. They have not made any decision yet - from what I've read recently this seems like a routine procedure when there is a sudden increase in volume. Feel free to email executiveoffice@paypal.com in support of the project and of releasing the funds if you'd like.

I may start considering another payment processor if this issue is not resolved soon. It seems like all of them have similar issues though - any online payment processors people know of with few customer complaints?

In the mean time I am still receiving orders - recently we passed the $40,000 mark with orders! Who could have expected it would reach that much after the first week or so ?!?!

User avatar
gnarlsagan

06 Feb 2016, 03:15

Ellipse wrote: nuum, andrew, and gnarl I am confident PayPal will take care of this issue. I have provided a written explanation and have escalated the issue to their Executive Escalations team. They have not made any decision yet - from what I've read recently this seems like a routine procedure when there is a sudden increase in volume. Feel free to email executiveoffice@paypal.com in support of the project and of releasing the funds if you'd like.

I may start considering another payment processor if this issue is not resolved soon. It seems like all of them have similar issues though - any online payment processors people know of with few customer complaints?

In the mean time I am still receiving orders - recently we passed the $40,000 mark with orders! Who could have expected it would reach that much after the first week or so ?!?!
Thanks for the update. I'd contact 7bit for tips on collecting payments. He's been doing this for a while.

I'll be sure to email PayPal in support of the project.

Ellipse

07 Feb 2016, 01:54

Thanks gnarlsagan - much appreciated.

User avatar
Tuntematon

07 Feb 2016, 07:05

I'd be curious to see an order breakdown to this point: F62 vs F77. Where is the love going?

User avatar
darkspider

07 Feb 2016, 08:53

Ellipse once told me that F62 was more popular than F77 when I asked him in the end of August.

User avatar
bhtooefr

07 Feb 2016, 17:11

Honestly, I'm undecided - I think I put F62 on the survey, but right now, my preference is leaning towards either my custom F62 layout (if enough people are interested in it to make it reasonably cheap to tool up), or F77. (It's not like this is going to be a light keyboard, so being small is less important.)

That's, of course, if other expenditures don't become a problem before the deadline...

User avatar
Tuntematon

07 Feb 2016, 21:15

bhtooefr wrote: Honestly, I'm undecided - I think I put F62 on the survey, but right now, my preference is leaning towards either my custom F62 layout (if enough people are interested in it to make it reasonably cheap to tool up), or F77. (It's not like this is going to be a light keyboard, so being small is less important.)

That's, of course, if other expenditures don't become a problem before the deadline...
I am torn in a few different ways. Can I spend, all told, ~$550 CAD on a keyboard? No, that's crazy. If I do say "to hell with reason!" then I don't know which one I want. The slim case is a nice idea, but the thick bezel is the defining feature of the Model F case, it would be a shame to scrap it. But the thick bezel adds width, not a big problem with the F62, but it makes the F77 wider than a TKL, which puts my mouse at a greater distance than I'd like. And I do like to have dedicated arrows keys and a few other extra keys. In short, I want a 75% Model F. Your custom layout is one solution, but I think I would still lean towards one of the standard offerings. I'm not a fan of horizontal row arrow keys.

Ellipse

07 Feb 2016, 22:14

Tuntematon - the order breakdown based on the 250+ keyboards' worth of order interest is about 150 F62, 100 F77.

49 F77s and 50 F62s have been paid for so far - about an even split!

And yes the ultra-compact case is definitely happening. The factory is on break for Chinese New Year for the next 2 weeks though so it will be delayed.

bhtooefr may I suggest ordering both versions :). Your layout preference may change a decade from now :)

User avatar
Tuntematon

07 Feb 2016, 22:50

Ellipse wrote: Tuntematon - the order breakdown based on the 250+ keyboards' worth of order interest is about 150 F62, 100 F77.

49 F77s and 50 F62s have been paid for so far - about an even split!

And yes the ultra-compact case is definitely happening. The factory is on break for Chinese New Year for the next 2 weeks though so it will be delayed.

bhtooefr may I suggest ordering both versions :). Your layout preference may change a decade from now :)
Almost dead even, that's a good sign! Shows you weren't wrong to offer these two variants. The slim case is tempting, will it retain the scooped out bottom edge? I think it's important to keep as much of the original design as possible.

Ellipse

07 Feb 2016, 22:56

Well Tuntematon the ultra-compact cases require a very simple extrudable metal design - they will look a lot like some of the other high end custom keyboard projects. Unfortunately the ultra-compact cases could not resemble the originals due to the thousands in additional tooling costs required.

User avatar
Tuntematon

07 Feb 2016, 23:12

Ahh, makes sense. Thanks for the replies. This is probably the most impressive keyboard project I've seen, it must be very satisfying to see it come together. I will buy one if I can.

User avatar
webwit
Wild Duck

07 Feb 2016, 23:18

What's the order deadline btw? I might want to order some black cases too, in case it goes with the furniture or pet in the future.

User avatar
t!ng
Awake Sheep

07 Feb 2016, 23:21

btw webwit: your avatar looks like a chipmunk riding a flying dragon.
Attachments
kl.png
kl.png (1.52 KiB) Viewed 5648 times
Last edited by t!ng on 07 Feb 2016, 23:26, edited 1 time in total.

User avatar
webwit
Wild Duck

07 Feb 2016, 23:24

No it doesn't :twisted:

Ellipse

07 Feb 2016, 23:29

webwit the deadline is 2/29 for the early round and 6/30 for the regular round.

User avatar
webwit
Wild Duck

07 Feb 2016, 23:31

Last edited by t!ng on 07 Feb 2016, 23:26, edited 1 time in total.
Damn, you came prepared ;)

User avatar
t!ng
Awake Sheep

07 Feb 2016, 23:33

now it looks like a penguin on a baby t-rex.
Attachments
2.png
2.png (3.48 KiB) Viewed 5780 times

User avatar
webwit
Wild Duck

07 Feb 2016, 23:34

Nah it's the same chipmunk, facing the viewer.

User avatar
t!ng
Awake Sheep

07 Feb 2016, 23:37

you're right! That tough chip...
Attachments
2.png
2.png (3.57 KiB) Viewed 5746 times

berserkfan

08 Feb 2016, 06:24

Very interesting. I don't come by often or use this layout, but it is very exciting to see an ancient keyboard revived seemingly so effectively. It really lays the template for future keyboard adventures - hopefully ending in the split layout I desire so much.

andrewjoy

08 Feb 2016, 10:56

Ellipse wrote: nuum, andrew, and gnarl I am confident PayPal will take care of this issue. I have provided a written explanation and have escalated the issue to their Executive Escalations team. They have not made any decision yet - from what I've read recently this seems like a routine procedure when there is a sudden increase in volume. Feel free to email executiveoffice@paypal.com in support of the project and of releasing the funds if you'd like.

I may start considering another payment processor if this issue is not resolved soon. It seems like all of them have similar issues though - any online payment processors people know of with few customer complaints?

In the mean time I am still receiving orders - recently we passed the $40,000 mark with orders! Who could have expected it would reach that much after the first week or so ?!?!
I appreciate the update but i would still prefer to wait. Payday is not until 14th anyway so we have some time.

User avatar
lootbag

08 Feb 2016, 23:29

Would also like to see some more positive concrete updates on the Paypal issue before submitting my purchase.
A lot of money to be tied for a long time.
I have sent an email to the specified Paypal address in support of your project Ellipse!
Hopefully it is of some help.

courtesi

09 Feb 2016, 01:53

Even though I'm not ordering until late in the 2nd batch ~ choosing between the F62 and F77 is giving me hemorrhoids.

User avatar
gnarlsagan

09 Feb 2016, 02:40

courtesi wrote: Even though I'm not ordering until late in the 2nd batch ~ choosing between the F62 and F77 is giving me hemorrhoids.
I was the same way. I figured that these will probably sell later for the same price we are buying them for, so I went with both and will just keep the one I like more. ;)

Ellipse

09 Feb 2016, 23:57

Yes they will be the same price for both batches. I also hope to produce some extra units in the first round to sell possibly at a premium for those who missed out of the first round but do not want to wait until August/September (when the regular round ships).

User avatar
seebart
Offtopicthority Instigator

09 Feb 2016, 23:58

Ellipse wrote: Yes they will be the same price for both batches. I also hope to produce some extra units in the first round to sell possibly at a premium for those who missed out of the first round but do not want to wait until August/September (when the regular round ships).
All of this is "premium" Ellipse! :o

Post Reply

Return to “Group buys”