Great/Interesting Finds

orihalcon

28 Feb 2016, 06:23

On the subject of green alps, does anyone have a board with particularly scratchy Alps Greens? I've seen it stated several places that they can't be cleaned and get the smooth feeling back, but I'd like to try if someone has some crappy ones that they aren't otherwise going to use. Any takers?

Now whether it's actually worth the hours it would take to clean a whole board worth, that's another matter. Guess it would depend on the result.

User avatar
E3E

28 Feb 2016, 13:13

orihalcon wrote: On the subject of green alps, does anyone have a board with particularly scratchy Alps Greens? I've seen it stated several places that they can't be cleaned and get the smooth feeling back, but I'd like to try if someone has some crappy ones that they aren't otherwise going to use. Any takers?

Now whether it's actually worth the hours it would take to clean a whole board worth, that's another matter. Guess it would depend on the result.
I do not, but I have designed switch tools that make possibly reduce those possible hours considerably as it can open switches in seconds. It really makes playing with Alps fun. I've designed one for linear Alps and one for all other Alps varieties.

Image

http://i.imgur.com/NRdYy0x.webm

I just used these little plastic things from Dremel because I had them around, but I want to buy some plastic for use in making these in -relative- bulk and selling them on eBay or running a group buy (I'd rather do this) for them.

I'm thinking either polyethelene or POM. These here are very flexible and resistant to acetone as well, so they're durable and won't snap if you sit on them or something, haha.

Any suggestions there from people who know plastics would be appreciated.

But yeah, these make switch swapping and experimenting so much more fun than the old toothpick method.


In regards to the scratchiness, I'd imagine an iso bath in an ultrasonic cleaner would clean the stems and housings well. An air blast into the bottom should rid the dust there. Might not need to soak the top one in isopropanol.

Then a dry film lube would be best. A friend of mine says Finish Line Extreme Fluoro if great for this. I have some molybdenum disulfide, but I'm not sure how well it sticks. I think a wet lube that dries to a film would be best if you ask me.

User avatar
seebart
Offtopicthority Instigator

28 Feb 2016, 20:55

seebart wrote: I am hereby asking EVERYONE to please leave this one to me:

http://www.ebay.de/itm/111909159554?ssP ... fresh=true
I'd now like to thank everyone who did not bid on this! I got it for a very reasonable price and will post a teardown when I get it.

Cheers.
thankyoucat.jpg
thankyoucat.jpg (26.09 KiB) Viewed 5481 times

User avatar
7bit

28 Feb 2016, 21:07

But only if you write a wiki article about it.
:evilgeek:

User avatar
Abstractions

28 Feb 2016, 21:09

seebart wrote:
seebart wrote: I am hereby asking EVERYONE to please leave this one to me:

http://www.ebay.de/itm/111909159554?ssP ... fresh=true
I'd now like to thank everyone who did not bid on this! I got it for a very reasonable price and will post a teardown when I get it.

Cheers.
thankyoucat.jpg


Yes, we will always obey you... As long as you post pictures of cats. :lol:

User avatar
Wodan
ISO Advocate

28 Feb 2016, 21:13


User avatar
seebart
Offtopicthority Instigator

28 Feb 2016, 21:19

7bit wrote: But only if you write a wiki article about it.
:evilgeek:
Yes will do. A wiki entry anyway.

Abstractions wrote: Yes, we will always obey you... As long as you post pictures of cats. :lol:
Oh it's that easy? Well then...
Spoiler:
61368488.jpg
61368488.jpg (124.84 KiB) Viewed 5435 times
OK since it worked once here we go again:

I am hereby asking EVERYONE to please leave this one to me:

http://www.ebay.de/itm/172116942183?ul_noapp=true

THANK YOU !
grad-school.jpg
grad-school.jpg (27.72 KiB) Viewed 5414 times
Last edited by seebart on 28 Feb 2016, 21:32, edited 1 time in total.

User avatar
photekq
Cherry Picker

28 Feb 2016, 21:23

http://www.ebay.de/itm/Highscreen-Cherr ... SwG-1W0wRF

What looks to be an excellent condition SAD keyset.

http://www.ebay.co.uk/itm/Cherry-G81-30 ... Sw~OVWz20B

What kind of layout is this? :o
Last edited by photekq on 28 Feb 2016, 21:25, edited 1 time in total.

User avatar
zuglufttier

28 Feb 2016, 21:24

Wodan wrote: Fellow community member @zuglufttier is having a little sale :)
Yes, I am! That stuff really needs to go. A bit cleaning up before I can aquire new stuff...

User avatar
Wodan
ISO Advocate

28 Feb 2016, 21:38

photekq wrote: http://www.ebay.co.uk/itm/Cherry-G81-30 ... Sw~OVWz20B

What kind of layout is this? :o
Some kind of British-International layout ?
There's a crazy new German layout "T2" which is similairly crowded ...

User avatar
Tuntematon

28 Feb 2016, 22:00

Who got that Chicony lot? E3E? It went surprisingly cheap.

User avatar
ohaimark
Kingpin

28 Feb 2016, 22:36

I sniped the Chicony lot.

User avatar
ohaimark
Kingpin

28 Feb 2016, 22:52


User avatar
OleVoip

28 Feb 2016, 22:53

photekq wrote: http://www.ebay.co.uk/itm/Cherry-G81-30 ... Sw~OVWz20B

What kind of layout is this? :o
Turkish.

User avatar
ramnes
ПБТ НАВСЕГДА

28 Feb 2016, 23:10


User avatar
ohaimark
Kingpin

28 Feb 2016, 23:11

Best $3 investment ever.

User avatar
HAL

28 Feb 2016, 23:39

The box is from a different SSK

User avatar
ohaimark
Kingpin

28 Feb 2016, 23:40

I didn't even look at the box, frankly.

User avatar
Redmaus
Gotta start somewhere

29 Feb 2016, 00:26

ohaimark wrote: I sniped the Chicony lot.
What chicony lot?

User avatar
ohaimark
Kingpin

29 Feb 2016, 00:30

Redmaus wrote:
ohaimark wrote: I sniped the Chicony lot.
What chicony lot?
http://www.ebay.com/itm/Chicony-Mix-mod ... 1561613605

The 5160 doesn't have Blue/Green Alps. So don't panic.

User avatar
E3E

29 Feb 2016, 02:13

Tuntematon wrote: Who got that Chicony lot? E3E? It went surprisingly cheap.

Haha yep, it wasn 't me. Already have some vintage MX whites, myself, and to be honest, I'm not even sure if I want to keep them as Alps is more my thing.

The other keyboards offered were cool, but not enough sway for me to buy in. That ergo board is definitely interesting though.

I would not have minded the 5160AT if it were Alps, regardless of type. It's one of the few 84 keys that seem neat to me.

Another would be the Ortek 84 key F AT/XT layout board that I forget the name of.

Boards of that layout don't interest me all that much, but aside from the Zeniths and Leading Edges, it's rare to see other 84 keys for the most part.

User avatar
Scarpia

29 Feb 2016, 08:07


User avatar
HzFaq

29 Feb 2016, 10:35

Holy shit, I didn't know they came in ISO. Another thing to add to my want-but-will-never-get list.

User avatar
kbdfr
The Tiproman

29 Feb 2016, 11:38

Wodan wrote: Fellow community member @zuglufttier is having a little sale :)
https://www.ebay.de/ulk/itm/172116953903
[…]
zuglufttier wrote: […] Yes, I am! That stuff really needs to go. A bit cleaning up before I can aquire new stuff...
Poor SAD board deserves its designation, missing a keycap :cry:
Interested in a "/" cap from another SAD? Perhaps it could help getting a better price :lol:
It's easy: join the DT club and get it for shipping costs :mrgreen:

User avatar
Muirium
µ

29 Feb 2016, 11:47

There is no happy ending to the imaginary tale you've just triggered in my mind about dyesubs. I HAD it all. But could only ever see SADness at what still lay out of reach…

User avatar
Wodan
ISO Advocate

29 Feb 2016, 11:49

SAGness ?

User avatar
photekq
Cherry Picker

29 Feb 2016, 11:51

photekq wrote: http://www.ebay.de/itm/MECHANISCHE-KEYB ... SwG-1WzdmZ

This is rather tempting.. :oops: It's probably a little overpriced, but it's not something you see every day. Shame I have no money or I'd probably take it!

If anyone ends up buying it and they don't want the keyboard/box please let me know. I have a set of G81-3000SAG keycaps and I would LOVE to complete the set, even if it is just a G81.
Cure for SAGness above! :mrgreen:

Lovely, lovely UK ISO dyesubs.

User avatar
Blaise170
ALPS キーボード

29 Feb 2016, 15:48

Link terminal - Not a great price but MX Blacks: https://www.pcliquidations.com/p18206-link-50-120-000
MC3 Terminal - Looks like it might be mechanical: https://www.pcliquidations.com/p21940-m ... 3-terminal
Televideo - Keycaps say maybe Alps... Maybe dome: https://www.pcliquidations.com/p21939-t ... l-keyboard
Unbranded WYSE - interesting but expensive: https://www.pcliquidations.com/p18179-u ... 1-terminal


I never realized the scope of companies that used WYSE as an OEM for their terminals. I see Tandy (RadioShack), CLSI, Reynolds, Link... I know I've seen many others too. There are a ton of WYSE boards on this site but I didn't post them since they are pretty expensive as a buy it now.

User avatar
quochung1989
Vintage Cherry Collector

29 Feb 2016, 16:09


User avatar
Wodan
ISO Advocate

29 Feb 2016, 16:41

HAL DKB-2010 RTTY/CW Tastatur, 120 € VB
https://www.ebay-kleinanzeigen.de/s-anz ... ium=social

Post Reply

Return to “Other external”