Post your keyboard/keycaps!

[DanielT]

This is my reserve with commercial keyboards too, I have gotten so used to full programmability and being able to do what I want. The only exception is HHKB, that one I like the way it is. I'm sold to the 60% format, but sometimes I splurge on a bigger board (well on the Dolch because it's the only big one left that it's mine ) so a 65% would be interesting, I usually do that when I'm tired and lazy.

[lolpes]

There is the TADA68 to tryout now, full progamability out of the box and 75$ with good caps is a great deal for it

[Stabilized]

This is my reserve with commercial keyboards too, I have gotten so used to full programmability and being able to do what I want. The only exception is HHKB, that one I like the way it is. I'm sold to the 60% format, but sometimes I splurge on a bigger board (well on the Dolch because it's the only big one left that it's mine ) so a 65% would be interesting, I usually do that when I'm tired and lazy.

Part of the reason why I also bought the Varmilo was to try a full metal keyboard with steel plate, to see what the typing experience would be like.
I think the problem for me with this layout is that even though you do save space over a TKL, it isn't very much. Here's a picture comparing a TKL, the Varmilo, a 75%, and a 60%:

Spoiler:

And here's another one with just the Varmilo and a 60%:

There is the TADA68 to tryout now, full progamability out of the box and 75$ with good caps is a great deal for it

That looks really good! Dammit now I am tempted to get one

[Stabilized]

Sorry to spam this thread, but my long awaited order from Taobao came and I just wanted to show off the acrylic case that I got. It's really think and is of high quality, I would recommend it; you can find it here.

[scottc]

Oooh, very nice. How much was it, all included? What proxy service did you use?

[Wodan]

And where did you get that coiled cable?

I need 10.

[Stabilized]

Oooh, very nice. How much was it, all included? What proxy service did you use?

The case was 350 yuan and the postage from China was 200 yuan (very slow China post, I wouldn't use it again).
The postage also included another case in it too (this one), and it weighed 1.4kg. Bear in mind that they set the exchange rate depending on their own terms (i.e. in their favour) and they also add on Paypal fees too.
In total the two cases cost me around £110-120 with shipping, but I would not use Dotdotbuy again as I am pretty sure they dropped and dented the aluminium case and their help department is awful.

And where did you get that coiled cable?

That was a Aliexpress purchase, the quality is ok, nowhere near as nice as a LINDY cable though!

[uncletobai]

blank pbt caps from massdrop. i ordered two sets, originally wanted to go for light grey modifiers, but my package was missing 6 of 7 1.25u modifiers but i'm very happy with all white too

[gogusrl]

AMJ60 pcb, vintage blacks, unknown acrylic case, ANSI dyesubs with lasered ISO Enter.

[GEIST]

My lime green HHKB Pro1 with dyed caps


Sadly the paint started to come off...

This looks amazing. Do you have some more, maybe brighter, images?

[DanielT]

My lime green HHKB Pro1 with dyed caps

Sadly the paint started to come off...

This looks amazing. Do you have some more, maybe brighter, images?

Here you have the whole story

[cookie]

This looks amazing. Do you have some more, maybe brighter, images?

Here you go: photos-f62/hhkb-pro1-after-restoration- ... estoration

[seebart]

blank pbt caps from massdrop. i ordered two sets, originally wanted to go for light grey modifiers, but my package was missing 6 of 7 1.25u modifiers but i'm very happy with all white too

Very nice, so clean!

[wobbled]

Model F 107 & Industrial SSK. I'm no good at taking pictures so these will have to do.

1468010704849.jpg (1.2 MiB) Viewed 18147 times

1467549641082.jpg (3.63 MiB) Viewed 18147 times

[zslane]

I get a chuckle out of the fact that an SSK is only a space saver when compared to other massive IBM boards of its era. But compared to modern boards, it doesn't save any space at all.

[lolpes]

Thank you wodan!




Also finally have my SSK with me, with displaywriter caps in PT layout

[shreebles]

Congrats on that SSK, those caps must be a good catch for someone from Portugal

You must be as happy as I was when I got the German APL IBM Model M from Plasticchair.

[seebart]

Wow...those SSK caps lolpes. Real nice.

[lolpes]

Thank you guys! Yes I am very happy with it!
The person from whom I got this kept labeling it as triumph adler typewriter, although it was clear that it was an IBM. The only thing TA in here, are the caps, which do remind me of the triumph adler typewriters symbols, which for me where even better since I love the TA colorway

Here is the typewriter:

[scottc]

Have you considered trying to make a tiny 60 + something percent board out of the full typewriter keyboard? Apparently you can just slot the membrane into a regular Model M controller and away you go.

[lolpes]

i did, but it would take a lot of unnecessary work for ne as for buckling spring this is my end game

[scottc]

There's no such thing! To be honest, most of the time when I build a keyboard it's not because I'm going to use it 24/7... I just enjoy the act of tinkering, soldering and getting stuff working. Maybe that's why I've got so many keyboards...

[lolpes]

There's no such thing! To be honest, most of the time when I build a keyboard it's not because I'm going to use it 24/7... I just enjoy the act of tinkering, soldering and getting stuff working. Maybe that's why I've got so many keyboards...

That is also why i have a lot of them too, but in the end i always want to use them, they have to have a use for me, or else i wont be motivated to do them ;p for the ibm that is just it, i just wanted the SSK, nothing more

[Stabilized]

So I have finished yet another 60% build!

This one has a bit of a blue theme:


And of course has blue backlight:


Here's a view of the case, I bought it from Taobao and am really happy with the quality and how it looks:


Just noticed while taking the pictures that the N key is wonky, now that's going to really bother me every time I look at it

[scottc]

Niiice. Looks fantastic!

[ramnes]

That case looks really FMJ-esque. Is it anodized or powder-coated?

[DanielT]

So I have finished yet another 60% build!

This one has a bit of a blue theme:

Spoiler:

And of course has blue backlight:

Spoiler:

Here's a view of the case, I bought it from Taobao and am really happy with the quality and how it looks:

Spoiler:

Just noticed while taking the pictures that the N key is wonky, now that's going to really bother me every time I look at it

This looks awesome The Bluegaloo mods go nice with BoW or WoB caps, very nice build. Fix that N I had the same issue with a right shift on one of the GH60 boards, it bothered me each time, I just had to fix it

[Stabilized]

Niiice. Looks fantastic!

Thanks!

That case looks really FMJ-esque. Is it anodized or powder-coated?

It really does, I wouldn't surprise me if it was heavily 'inspired' by that case. I am not sure how to tell the difference, but I would assume anodised? It's got a smooth finish, it's not rough, and the case was CNC milled from what I can tell.

This looks awesome The Bluegaloo mods go nice with BoW or WoB caps, very nice build. Fix that N I had the same issue with a right shift on one of the GH60 boards, it bothered me each time, I just had to fix it

Thanks Daniel I have had these Bluegaloo caps for a while and never had a use for them.
I am not entirely sure what the problem comes from, maybe the switch? How did you fix your shift?

[DanielT]

On my shift the problem was a bit complicated, the holes for the plastic pins were a little off, so I had to file them a little.
But I had this problem with single caps before on plate mount switches, desoldering and resoldering them solved the problem.

[Stabilized]

Cool, thanks for the tips, I will have a look at it and try and work out what the problem is