Prototyping the next thing

cflee · 06 Apr 2016, 17:13

Awesome!! I was not interested in a RGB keyboard but with BT 4.0, but definitely following this now. (Not that I wasn't already subscribed, but still..)

gogusrl · 06 Apr 2016, 21:07

that third switch better be Space Invaders

laxu · 11 Apr 2016, 18:19

Very interested in this, especially if it's available in Europe.

What kind of case will it have?

matt3o · 11 Apr 2016, 19:41

still working on the case, we probably need to use acrylic for the sides for better BT reception.

robotsokk · 12 Apr 2016, 08:00

The keyboard will be a full RGB keyboard with BT4.0 add-on module.

Awesome! Definitely going to hold out for this to be my first Alps (Matias) board.

vivalarevolución · 13 Apr 2016, 22:05

matt3o wrote: ↑still working on the case, we probably need to use acrylic for the sides for better BT reception.

Will it be a layered case with metal top and bottom plate and an acrylic middle piece?

matt3o · 14 Apr 2016, 15:16

we could do a polycarb tray with an alu plate, but we are still working on that

Redmaus · 14 Apr 2016, 15:19

So layout is still 60% as of right now?

matt3o · 14 Apr 2016, 15:23

60 and 65

Caeg · 06 May 2016, 11:45

@Matt3o Any updates? I really can't wait for this keyboard to come out.

matt3o · 06 May 2016, 11:47

I'm working on the financial part. Basically if I'll be able to work on my own or need a sponsor or something kickstarter like

Caeg · 06 May 2016, 11:49

Gotcha. Well you already got my money.

Thanks for the update!

brighenne · 07 May 2016, 00:47

Any chance 7u spacebar bottom row will be supported?

Gorbon · 17 Jul 2016, 20:04

matt3o wrote: ↑ I'm pushing for both ALPS and Cherry switches and it might be possible to also have a third super secret switch (never used before as far as I know).
I'll keep you posted!

I know they won't be super secret anymore (just plain secret

), but any hints on those new switches? Tactile, clicky, linear, springs, leaf springs, domes, scissors...?

Also, with the switch variety support, wouldn't it be awesome to have switch hot-swapping (à la Smart 68) via sockets on the PCB, without the need for soldering? I know it is probably a stretch, but... one can hope/dream!

Rimrul · 17 Jul 2016, 23:19

Gorbon wrote: ↑
matt3o wrote: ↑ I'm pushing for both ALPS and Cherry switches and it might be possible to also have a third super secret switch (never used before as far as I know).
I'll keep you posted!
I know they won't be super secret anymore (just plain secret ), but any hints on those new switches? Tactile, clicky, linear, springs, leaf springs, domes, scissors...?

It's a beamspring topre hybrid w/ ML mount

oschrenk · 18 Jul 2016, 11:21

Very excited for this project. I'm looking for a ~60% Bluetooth enabled board with TMK firmware for a long time.

matt3o · 18 Jul 2016, 15:21

Gorbon wrote: ↑I know they won't be super secret anymore (just plain secret ), but any hints on those new switches? Tactile, clicky, linear, springs, leaf springs, domes, scissors...?

they are kahil switches, they come in linear, tactile and clicky.

Gorbon wrote: ↑Also, with the switch variety support, wouldn't it be awesome to have switch hot-swapping (à la Smart 68) via sockets on the PCB, without the need for soldering? I know it is probably a stretch, but... one can hope/dream!

I don't think that would be possible

scottc · 18 Jul 2016, 15:33

The weirdo Cherry ML clones! I guess you're getting caps made too then?

matt3o · 18 Jul 2016, 16:38

I should get samples by the end of the month

spacemonkey001 · 21 Jul 2016, 21:43

This is extremely exciting, especially the trackpoint. Is it possible to make the trackpoint long enough so it works with SA keycaps? This is my main beef with the Yoda.

scottc · 21 Jul 2016, 23:58

That's so exciting. I can't wait. Nice one Matt3o

Caeg · 10 Sep 2016, 10:53

Any updates on this? It's been a while.

victorhooi · 18 Oct 2016, 16:02

Hi,

Super excited about this, especially the Bluetooth 4.0 =).

Are there any updates on this?

Ready to pay for this!

Regards,
Victor

matt3o · 18 Oct 2016, 16:28

yes, I have found the controller and bluetooth module. I just have to find the time to assemble the whole thing

I'm working on the elf-board right now, so it might take some time.

victorhooi · 19 Oct 2016, 14:54

Awesome stuff! So glad to hear the Bluetooth is proceeding along.

I know you said $200 was a psychological price point - just to let you know, I for one am definitely willing to pay $200 (or even a tad more) per keyboard, and I'd get two (one for work and home).

Also - I may be able to organise a group buy for my workplace, if that helps at all - will PM you.

I'm using a Minila Air at the moment - definitely like having arrow keys, and it's a compact layout, but I've always found the Bluetooth super-flakey on these, and the plastic case feels cheap.

Elf-board - wait, as in the wooden keyboard here?

https://geekhack.org/index.php?topic=59827.0

Interesting....

Phenix · 24 Oct 2016, 23:47

Split space sounds good!
but 3u/3. 5u space - where to get caps? would be optiona for 2u/2. 25/2. 75u possible?

gogusrl · 25 Oct 2016, 10:13

I'd go for 2.75 / 1.25 / 2.25 or the other way around 2.25 / 1.25 / 2.75 so it's easy to source and you get a FN in the middle of the spacebar which rocks because you can do all the shortcuts with your left hand and keep the right on the mouse.

victorhooi · 30 Dec 2016, 04:13

@matt3o - Hope you had a good Christmas break!

Do you think you'll have any time to work on it this coming year?? (2017).

matt3o · 30 Dec 2016, 09:44

I'm still 100% committed, unfortunately life tends to fuck up all my "toy projects" time

Anyway I already have the full controller+charger+bluetooth stack. I just have to make some tests. I now also have a 3D printer that hopefully will help with prototyping the case.

The project is not forgotten, just on queue

Caeg · 03 Jan 2017, 04:11

matt3o wrote: ↑I'm still 100% committed, unfortunately life tends to fuck up all my "toy projects" time

Anyway I already have the full controller+charger+bluetooth stack. I just have to make some tests. I now also have a 3D printer that hopefully will help with prototyping the case.

The project is not forgotten, just on queue

Glad to hear that. Still really looking forward to this project!