Stuff you just bought

[u-ra]

And you're using it through a PS/2 port or Soarer as opposed a cheap converter? Someone recently had issues with two Alps boards and it turns out it was capacitors, although those werent working at all - keyboards-f2/every-alps-board-i-buy-is- ... 14609.html

I am using a cheap converter, but said converter works well with my other AT102Ws and DFK192 and K104. I'll try a not-too-cheap one I have at work, but I'm not hopeful.

[ohaimark]

HAH. I was right about that HHKB-like keyboard having Alps switches. The nav cluster in the upper right hand corner surprised me, though. It uses SKFL switches.

Better photos will follow after cleanup.

[E3E]

HAH. I was right about that HHKB-like keyboard having Alps switches. The nav cluster in the upper right hand corner surprised me, though. It uses SKFL switches.

Better photos will follow after cleanup.

Can you take a side profile shot of the sculpt? I wonder if it's different from other spherical Alps profiles I've seen. The caps almost seem uniform, but it's not easy to be sure without a view of the actual sculpt profile.

[HAL]

I just got the new camera I ordered on sunday.

[hypkx]

Something very interesting.

[alh84001]

BS? nice

[snoopy]

more pics plz

[snoopy]

Didn't buy it, but just found a nice white label Model M from 1992 in the trash (german "Sperrmüll") in a nearby town. Fully working, has all its keycaps, only a bit dusty/dirty. Very happy, my best free keyboard find so far.

[Elrick]

Didn't buy it, but just found a nice white label Model M from 1992 in the trash (german "Sperrmüll") in a nearby town. Fully working, has all its keycaps, only a bit dusty/dirty. Very happy, my best free keyboard find so far.

Damn those are nice.

Always keep exceptional caps because quite frankly, they're not freely available anymore.

Like to see more rare BS caps here on DT.

[hypkx]

BS? nice

Yes bs

[alh84001]

Yeah, I just commented recently on nice keycaps that ISO wheelwriters can have. This looks to me like one of those

[Wodan]

Good on MX Clears now. Seller said he had six different types, I only count five different ones. Still ... nice overview of the WeyTec variants.

Also funny how some keys are doubleshot and others are printed.

Don't judge

[kbdfr]

[…] Don't judge

That's the best part of your post

[derzemel]

Good on MX Clears now. Seller said he had six different types, I only count five different ones. Still ... nice overview of the WeyTec variants.

Also funny how some keys are doubleshot and others are printed.

Don't judge

I wonder, could you make these work with a modern computer and display computer information on the integrated display?

Maybe if you stick a Raspberry Pi in it... hmm

[tigpha]

On a whim, and because it was in the low double digits, I bought this:

ebay HP2621A keyboard

3a8c78f93c55f050.jpg (77.8 KiB) Viewed 7033 times

It looks as if it's Stackpole or HiTek. I've not tried this type of switch before. And it's my first acquisition with spherical key caps. I am curious to feel what they are like. I tried to find what terminal make and model it is, and I believe to have found it: HP2621A. Am I correct?

Image stolen from the interwebs

69f1e143781334b14cda4b90e195ef86.jpg (42.59 KiB) Viewed 7033 times

The missing "NUM" key was found by the vendor, in a pitiful state, but at least the keyboard appears to be complete.

c51074baf4521285.jpg (544.53 KiB) Viewed 7033 times

[gogusrl]

QFR with mx black


Acer 6511-TW



Chicony something

[seebart]

On a whim, and because it was in the low double digits, I bought this:

Oh wow love it. Conrgats.

It looks as if it's Stackpole or HiTek. I've not tried this type of switch before. And it's my first acquisition with spherical key caps. I am curious to feel what they are like. I tried to find what terminal make and model it is, and I believe to have found it: HP2621A. Am I correct?

I don't know if it actually belongs to the HP2621A but it certainly looks like it!

The missing "NUM" key was found by the vendor, in a pitiful state, but at least the keyboard appears to be complete.

Yeah "NUM" suffered some but still better than missing it.

[u-ra]

I am using a cheap converter, but said converter works well with my other AT102Ws and DFK192 and K104. I'll try a not-too-cheap one I have at work, but I'm not hopeful.

Well I'll be damned, it was the converter. Board works fine when plugged straight into a PS/2 port.

[seebart]

I am using a cheap converter, but said converter works well with my other AT102Ws and DFK192 and K104. I'll try a not-too-cheap one I have at work, but I'm not hopeful.

Well I'll be damned, it was the converter. Board works fine when plugged straight into a PS/2 port.

There you go, does not suprise me one bit. Converter is not = converter, I've noticed big differences eventough the converters looked almost identical visually. There is a lot of garbage out there.

[vsev]

Been busy lasts weeks and will be too for a while, but I managed to get my hands on some boards (again).
Those were announced in french part and somewhere else I figure, I've called the seller about 2 weeks ago and was lucky he finish to accept to send me part of the lot (I lived somewhere around his location once, that helped me ).
Anyway first beamspring and an azerty one, I'm really happy with this one !

WP_20161010_11_52_29_Pro.jpg (321.62 KiB) Viewed 6933 times

Crappy pics from roomate's phone, mine isn't smart at all.

WP_20161010_11_53_02_Pro.jpg (256.73 KiB) Viewed 6933 times

The others are 2 bigfoot's XT with one in some box that is quite destroyed but seems to be fair new and dirty as hell ( suspect box stayed open for a long while ).

WP_20161010_11_54_03_Pro.jpg (368.29 KiB) Viewed 6933 times

WP_20161010_11_52_42_Pro.jpg (246.07 KiB) Viewed 6933 times

And the big daddy dirt as the rest

WP_20161010_11_53_14_Pro.jpg (433.24 KiB) Viewed 6933 times

Will certainly get rid of the XTs for a very fair price(what costs me).
Nothing keyboard related but I also get this that I've got for few bucks and a smile..
The right one I opened myself to clean its Beyerdynamic M81 a very fine vintage one, the others too BTW

WP_20161010_16_17_16_Rich.jpg (327.87 KiB) Viewed 6933 times

And finally a mysterious NICOLS turntable that seems to be old(70's or 80's) high end stuff, the plate is heavy as hell..

WP_20161010_10_22_18_Rich.jpg (505.86 KiB) Viewed 6933 times

WP_20161010_10_23_54_Rich.jpg (209.34 KiB) Viewed 6933 times

Sorry about long post and again for bad pics quality, but I share the proper camera with others and so don't have it always !

[Darkshado]

Happy to see these didn't end up in the trash!

[emdude]

Just ordered that M0116 I've been wanting for some time, serial no. is ~380k, which should hopefully mean SKCM Orange.



EDIT: Out of curiosity, does anyone know the upper bound to M0116 serial no. for ones containing Oranges? I recall fohat saying that for the AEK, one should expect Salmons at no. >500k.

[photekq]

Wow. Congrats vsev!

[Wodan]

Indeed, le beam springé!

[hypkx]

Bought some blank pcbs, usb b sockets, micro to mini usb socket cables, pro micros. Enough stuff to mod some model Ms .

[alh84001]

I was just about to do the same

[hypkx]

I was just about to do the same

btw the b sockets are for the Ms that have a hole in the backside and the short cables (with the usb mini socket on their end) for example for my m122 which has just a little hole for cable.

Currently I try to program the pro micro but it isn't that easy

[hypkx]

I bought another terminal model M and a square Label model M.

[y11971alex]

I bought a 75-key 3278 for $75.

This is the vendor's photo, will make thread when it arrives

[seebart]

That's quite a IBM score vsev, congrats. Another 5251, they've been popping up all over the place this year. I've never seen a bigfoot with a guide still in place nice. Come to think of it I've never seen a boxed Bigfoot either.