Price Check: How much is my _____ worth?

[davkol]

What about Cherry G81-3100SEBUS from '96 in mint/NIB condition? It's clean, supposedly never used, there are only minor color blemishes on the case. Comes in original cardboard box.

I've found just Photekq's G81-3100SDU sale asking for $450 so far.

[photekq]

Wow. A SEBUS? I've never heard of or seen one of those before.

Could you tell me : Is the bottom row A-profile or B-profile?

I would suggest that $450 would be a good price regardless of the bottom row profile, but right now I think you will have trouble selling it for that. I say this because alienman82 on GH has single-handedly butchered the OG dyesub market by selling a lot of used sets for absurdly low prices. That's why I'm not advertising any of mine for sale right now.

[davkol]

Thanks.

(update:) I believe it's the steeper angle, so A?

[photekq]

Remember that G81-3015HAR you sold me? It's a great reference, since AEG Olympia boards have mixed profile bottom rows.



The bottom row arrow/numpad keys are steep, tall A-profile. The Controls/Alts are low, flat B-profile.

A good indicator is the spacebar. If the front edge is higher than the spacebar then it's A-profile. If it's lower then it's B-profile.

[davkol]

Ha, thanks for the reminder. I found both kinds of modifiers (but laser-etched) on my Phantom in the meantime.

A-profile confirmed, I think.

[photekq]

Gah, that's a shame. I thought there might be a chance of it being another B-profile dyesub board. So far the only one I've seen is the G81-3100SPBUS. Thanks for the info!

[Jimi14]

Was planning on slimming down my collection by getting rid of some domes i don't really have any use for.

DSC_0091.JPG (213.22 KiB) Viewed 5262 times

Just wanted to check if i'm making any mistakes by putting them out for a 2-3 euros each.

(the olivetti is missing its cable, works with an model m one though.

[scottc]

The Olivetti is nice and you can probably get a bit more than 2-3 euro for it. They're pretty nice, as rubber domes go. Not sure who would buy it, though!

[Jimi14]

The Olivetti is nice and you can probably get a bit more than 2-3 euro for it. They're pretty nice, as rubber domes go. Not sure who would buy it, though!

Eh, i thought it was nothing special. thanks for the tip anyway though.

[elecplus]

One seriously dirty yellow blue Alps keyboard, tested. The 2@ key works intermittently. Tested with an Orihalcon cable.

IMG_5824.JPG (566.12 KiB) Viewed 5157 times

IMG_5824.JPG (566.12 KiB) Viewed 5157 times

The switch on the back says 1 2 3.
What is it worth? Somebody make a good offer?

[ohaimark]

I'd say $200 in its current condition? Blue Alps ANSI keyboards are very desirable.

[elecplus]

I'd say $200 in its current condition? Blue Alps ANSI keyboards are very desirable.

That seems like a lot... This one does have double shot caps though.

[Ir0n]

I'd say $200 in its current condition? Blue Alps ANSI keyboards are very desirable.

That seems like a lot... This one does have double shot caps though.

After seeing how bat shit crazy people go with these on ebay 200 bucks seems like a damn good deal.

[seebart]

I'd say $200 in its current condition? Blue Alps ANSI keyboards are very desirable.

That seems like a lot... This one does have double shot caps though.

If it does not have any damage then $200 is a realistic price if indeed it does have blue Alps.

[Scarpia]

$200 may be the price on eBay on an average day, but Cindy prices are consistently (a lot) more reasonable than that, so I'd put it at a grab-it-now Cindy price of maybe $140-160?

It does depend on the condition of the switches though. If the switches are buttery smooth, $180-$200 easily.

[elecplus]

I'd say $200 in its current condition? Blue Alps ANSI keyboards are very desirable.

That seems like a lot... This one does have double shot caps though.

If it does not have any damage then $200 is a realistic price if indeed it does have blue Alps.

Beautiful blue Alps with double shots. XMIT just confirmed for me

[seebart]

If it was cleaned and tested it could sell for more. I'm not a fan of the blue Alps hype, but the market is the way it is.

[Chyros]

The price for that depends almost completely on the condition of the switches. If they feel like new, you're doing people a big favour if you only charge $200 for it, especially the doubleshot model. If they feel less than that, I'd charge less, depending on how bad it is.

[fohat]

Given what looks like considerable shine along with some nasty yellowing, I would say that decreases the value quite a bit. I have had moderate success Retro-briting cases like that, but never those old Alps keys.

On the other hand, a true-ANSI layout is quite rare.

[seebart]

The price for that depends almost completely on the condition of the switches. If they feel like new, you're doing people a big favour if you only charge $200 for it, especially the doubleshot model. If they feel less than that, I'd charge less, depending on how bad it is.

That's right. Of course on ebay no one knows or asks such questions (yet). The real problem with Alps SKCM is that if their worn enough that's it. Lubing won't help much anymore. In that sense Alps SKCM are almost like a really slow suicide switch. I have two cleaned Apple M0118's here both with salmons and the difference is shocking. One must have seen way more action than the other.

Given what looks like considerable shine along with some nasty yellowing, I would say that decreases the value quite a bit. I have had moderate success Retro-briting cases like that, but never those old Alps keys.

On the other hand, a true-ANSI layout is quite rare.

Yellowing and even shine can be taken care of, worn Alps not. Only replaced.

[elecplus]

The blue Alps is now claimed, pending what it does after I thoroughly clean it. I am not into tearing switches apart, but the rest is manageable.

[XMIT]

How about a complete NCR G81-3000 SAU with dark gray case and original Cherry thick PBT dye subs? Folks on GH and Reddit would go crazy for those... elecplus has one sitting in the office.

[elecplus]

NCR G81-3000 SAU with dark gray case and original Cherry thick PBT dye subs

IMG_5829.JPG (624.64 KiB) Viewed 5123 times

IMG_5830.JPG (511.89 KiB) Viewed 5123 times

IMG_5831.JPG (501.73 KiB) Viewed 5123 times

[need]

NCR G81-3000 SAU with dark gray case and original Cherry thick PBT dye subs

IMG_5829.JPG

IMG_5830.JPG

IMG_5831.JPG

This is going to cost an arm and a leg...

[elecplus]

NCR G81-3000 SAU with dark gray case and original Cherry thick PBT dye subs

IMG_5829.JPG

IMG_5830.JPG

IMG_5831.JPG

This is going to cost an arm and a leg...

I am asking $300. Is that reasonable?

[Daniel Beardsmore]

I am asking $300. Is that reasonable?

Well, out of interest, how does it feel to type on, to you?

[fohat]

I am not even a Cherry guy, but that looks amazing.

It seems like the question revolves around: "Can an MX inner assembly be fitted into that exterior?"

[elecplus]

I am asking $300. Is that reasonable?

Well, out of interest, how does it feel to type on, to you?

Already left work. Will let you know tomorrow

[kbdfr]

NCR G81-3000 SAU with dark gray case and original Cherry thick PBT dye subs[…]

This is going to cost an arm and a leg...

I am asking $300. Is that reasonable?

You're spoiling the prices!

[…]
It seems like the question revolves around: "Can an MX inner assembly be fitted into that exterior?"

Yes, no doubt. I just gave it a try with mine:

MX inner assembly fitted into the case of a NCR G81-3077 SAF

G81-3077 with MX assembly.JPG (529.19 KiB) Viewed 4951 times

[Orpheo]

How much is that worth? I just love the look of this keyboard, it's history with Bull because I am a French geek. But it's F&F Keytronic, and the connector is Db9 with surely a weird protocol and I don't even know if there exist a converter out there... But I love it's looks and nice keycaps... Should I buy it and at what max price please?

[url=https://flic.kr/p/Qk1RaZ]