[taobao goods (updatedx4)interest check]

tinnie

11 Jun 2012, 15:01

Last edited by tinnie on 20 Jun 2012, 10:39, edited 17 times in total.

User avatar
002
Topre Enthusiast

11 Jun 2012, 15:15

Every time I try and use Taobao I feel like I am just doing it wrong because I can never find interesting stuff like IBM SSK's.

Any suggestions for non-Chinese readers/buyers for finding this loot you speak of?

tinnie

11 Jun 2012, 15:22

002 wrote:Every time I try and use Taobao I feel like I am just doing it wrong because I can never find interesting stuff like IBM SSK's.

Any suggestions for non-Chinese readers/buyers for finding this loot you speak of?
I can find it for you, just leave down the stuff you want and I will try it to find for you, there is some model m ssk selling at very low pricen around 40 eur or less
Here is the link: http://a.m.taobao.com/i4853454135.htm?s ... bf88b0844d

User avatar
dirge

11 Jun 2012, 15:26

How much including postage for the one you've linked?

User avatar
fossala
Elite +1

11 Jun 2012, 15:26

just be careful with the Chines guys, a few months ago one of my friends bought an ibm ssk and surprise surprise the inside part # did not match the shell part #. The Chines rebuild these boards. So before selling these boards as unmodified boards, make sure to verify this.
I got sent this by a member when I was ordering mine (that I ended up getting scammed on by taobaobee).

User avatar
Icarium

11 Jun 2012, 15:29

tinlong117 wrote:
002 wrote:Every time I try and use Taobao I feel like I am just doing it wrong because I can never find interesting stuff like IBM SSK's.

Any suggestions for non-Chinese readers/buyers for finding this loot you speak of?
I can find it for you, just leave down the stuff you want and I will try it to find for you, there is some model m ssk selling at very low pricen around 40 eur or less
Here is the link: http://a.m.taobao.com/i4853454135.htm?s ... bf88b0844d
Are there any BS boards with extra keys like the japanese seem to have? Like this: http://deskthority.net/marketplace-f11/ ... t2777.html

tinnie

11 Jun 2012, 18:43

fossala wrote:
just be careful with the Chines guys, a few months ago one of my friends bought an ibm ssk and surprise surprise the inside part # did not match the shell part #. The Chines rebuild these boards. So before selling these boards as unmodified boards, make sure to verify this.
I got sent this by a member when I was ordering mine (that I ended up getting scammed on by taobaobee).
okay, firstly,i dont know the condtition of the board until i get it, i know that some of the seller in taobao is like that, selling fakes, send the wrong package or whatever... Secondly, im just a keyboard enthusiast, i wont scam or selling fakes to all of the people....... :)
Last edited by tinnie on 11 Jun 2012, 19:53, edited 1 time in total.

tinnie

11 Jun 2012, 18:46

Icarium wrote:
tinlong117 wrote:
002 wrote:Every time I try and use Taobao I feel like I am just doing it wrong because I can never find interesting stuff like IBM SSK's.

Any suggestions for non-Chinese readers/buyers for finding this loot you speak of?
I can find it for you, just leave down the stuff you want and I will try it to find for you, there is some model m ssk selling at very low pricen around 40 eur or less
Here is the link: http://a.m.taobao.com/i4853454135.htm?s ... bf88b0844d
Are there any BS boards with extra keys like the japanese seem to have? Like this: http://deskthority.net/marketplace-f11/ ... t2777.html
i can find two japanese model m but not ssk (and in yahoo auction jp, not taobao), one of it, is nib and other one is used, but the price of nib one is incredibly high, 100,000 yen, and i think this is overpriced, for the other one, is selling 15,000 yen
i can help you to buy if you really want this
thanks

tinnie

11 Jun 2012, 19:52

002 wrote:Every time I try and use Taobao I feel like I am just doing it wrong because I can never find interesting stuff like IBM SSK's.

Any suggestions for non-Chinese readers/buyers for finding this loot you speak of?
Tell you a skill to make it easier to find goods, make the keywords short like you want to search model m ssk than just type model m , because all of the seller don't know much english, so they will say ssk is The short version of model m......lol

tinnie

11 Jun 2012, 19:54

dirge wrote:How much including postage for the one you've linked?
Must be under 80 eur may be 65-75eur

longweight
key-bored

11 Jun 2012, 20:21

KBC Poker with Blues please!

User avatar
Acanthophis

11 Jun 2012, 22:06

I'm not very familiar with taobao. Are the items on there always new or are there also some listed as used?

User avatar
RC-1140

11 Jun 2012, 22:16

this is interesting, but I'm a little afraid of the taxes and the shipping to Germany. On the other hand... A SSK and a Kinesis for around 75€? Awesome!

User avatar
hamza_tm

11 Jun 2012, 22:22

POKERS

lots of em

any switch but browns preferred please :D

BrodyF

11 Jun 2012, 23:27

+1 Poker brown

User avatar
7bit

11 Jun 2012, 23:32

How much costs the G80-0577 including shipping?

If not too expensive, I'm interested in this!

tinnie

12 Jun 2012, 02:05

7bit wrote:How much costs the G80-0577 including shipping?

If not too expensive, I'm interested in this!
for the board is 125 eur, shipping to me take 7-8 euro, to you may be 30euro, not included the tax

User avatar
fossala
Elite +1

12 Jun 2012, 08:42

I'm very intrested in G80-1838 HFU if it is not too much.

User avatar
dirge

12 Jun 2012, 09:13

I think a few would like a group buy for the G80-9009 HAU. Thats one big battleship.

User avatar
fossala
Elite +1

12 Jun 2012, 09:19

If people in the UK want anything can't we get it shipped over to one of our houses. Then re-package and re-ship to each other? Should save a bit of money.

tinnie

12 Jun 2012, 09:27

fossala wrote:I'm very intrested in G80-1838 HFU if it is not too much.
the board is cost around 90 eur, the shipping to me may cost around 5 eur, than to yours is around 20euro

User avatar
fossala
Elite +1

12 Jun 2012, 09:46

Just been checking out how much it would cost myself. There seems to be some rounding up of your numbers (around 10 euros worth). I don't mind paying a fee for your time but would like you to be transparent.

tinnie

12 Jun 2012, 09:53

fossala wrote:Just been checking out how much it would cost myself. There seems to be some rounding up of your numbers (around 10 euros worth). I don't mind paying a fee for your time but would like you to be transparent.
yes... because im rounding up the currency (and i havent check the real time one), this is just a interest check, i will let you guys know the actual price when this is going to serious :D
thanks

tinnie

12 Jun 2012, 13:17

11screenshot_ultimatde_free.jpg
11screenshot_ultimatde_free.jpg (52.17 KiB) Viewed 6537 times
11screenshot_ultimatde_free.jpg
11screenshot_ultimatde_free.jpg (52.17 KiB) Viewed 6537 times
fossala wrote:Just been checking out how much it would cost myself. There seems to be some rounding up of your numbers (around 10 euros worth). I don't mind paying a fee for your time but would like you to be transparent.
It is not around 10euro worth, just 4 xD, I think my estimation is quite good :D

User avatar
fossala
Elite +1

12 Jun 2012, 14:04

I was including the shipping to you as well. Then guessing if you over charged on the other two you probly would with shipping to me. Hence 10 euro. :)

User avatar
mbodrov

12 Jun 2012, 18:42

fossala wrote:I'm very intrested in G80-1838 HFU if it is not too much.
You're aware, of course, that it's not a 1838, but a Dolch PAC (G80-1813) PCB (or maybe only the keycaps, with a different MX Blue PCB) in a G81-1800LPAUS case?
I'd say over half of the Cherry keyboards on Taobao are frankensteined together like that. This one is worth nowhere near 688 yuan, which is a bit too steep even for a real 1838.

User avatar
attarian

12 Jun 2012, 19:37

Half of the products are out of stock!

User avatar
off

12 Jun 2012, 20:32

mbodrov wrote:
fossala wrote:I'm very intrested in G80-1838 HFU if it is not too much.
You're aware, of course, that ...
I'd say over half of the Cherry keyboards on Taobao are frankensteined together like that. This one is worth nowhere near 688 yuan, which is a bit too steep even for a real 1838.
TYVM!

tinnie

13 Jun 2012, 02:07

mbodrov wrote:
fossala wrote:I'm very intrested in G80-1838 HFU if it is not too much.
You're aware, of course, that it's not a 1838, but a Dolch PAC (G80-1813) PCB (or maybe only the keycaps, with a different MX Blue PCB) in a G81-1800LPAUS case?
I'd say over half of the Cherry keyboards on Taobao are frankensteined together like that. This one is worth nowhere near 688 yuan, which is a bit too steep even for a real 1838.
yes, it is. Some of 1813 is put on a G81-1800case, so I think I should put this quote on the first post,thanks

tinnie

13 Jun 2012, 12:26

mbodrov wrote:
fossala wrote:I'm very intrested in G80-1838 HFU if it is not too much.
You're aware, of course, that it's not a 1838, but a Dolch PAC (G80-1813) PCB (or maybe only the keycaps, with a different MX Blue PCB) in a G81-1800LPAUS case?
I'd say over half of the Cherry keyboards on Taobao are frankensteined together like that. This one is worth nowhere near 688 yuan, which is a bit too steep even for a real 1838.
is this a real 1838?
http://item.taobao.com/item.htm?id=16225620148
thanks

Post Reply

Return to “Group buys”