Olivetti KBD 2812

[Icarium]

I've opened up this old olivetti board and would like some help identifying the switches. They kind of look like black MYs but don't feel like rubber domes.

overview

DSC01725.JPG (327.83 KiB) Viewed 4656 times

switch

DSC01727.JPG (296.86 KiB) Viewed 4656 times

I can't open the switches without destroying them because they are mounted using plastic nubs.

switch fixtures

DSC01728.JPG (274.33 KiB) Viewed 4656 times

This is the label if it helps.

label

DSC01729.JPG (173.84 KiB) Viewed 4656 times

[7bit]

MY, the older variant.

[Icarium]

So is it actually a rubber dome? Feels pretty damn linear to me.

[off]

Correct. And indeed, they feel nothing like rubber domes, but have fun typing on them for a while.
Also dismantling the switch can easily be done while mounted, much easier actually than what I did initially (cutting off the plastic nibs, and when done flowing superglue over that side (where the nibs used to be)):
Just take two small screwdrivers, or screwdriver bits, flat, and put them into those two slots. Tilt them outwards so the tips tilt inwards and release the plastic clips, while pulling up. You will be left with the insert, and a spring. The contact itself is inserted into the plastic holder from the bottom, so to get at that you'd have to cut them off; but no point in getting to those anyway, so..
quick pre-post edit: no rubber in this board. A membrane, yes.

[7bit]

Mine comes with Italian layout and real MX switches!

[off]

get your dyesub out of this thread, shoo!

[7bit]

get your dyesub out of this thread, shoo!

They are not dyesubbed! The are doubleshotted!!!

[Grond]

No dyesubs here, blue on white double-shots on both Icarium and 7bit's keyboards.
As I stated before, you can actually find several combinations of switches and keycaps under the name Olivetti KBD 2812:
- black cherry MY, white cherry MY, black cherry MX;
- blue on white dye-subs, blue on white doubleshots, mixture of double-shots and pad printed keycaps.
According to my experience, all variants were manufactured in 1990.

[7bit]

Mine seems to be from 1990 (C).

@Icarium: Post a picture of that white sticker on the PCB!

[dirge]

Your case is the same as the one ^ Grond sent me. It's what I'm using right now

[7bit]

Your case is the same as the one ^ Grond sent me. It's what I'm using right now

I will try to retrobrite it. If it works well you can have my replacement case which has an intact LED cover.

Thanks to Grond and Gilgam, my keyboard was way overpriced BTW!

[Icarium]

Yes! Do retrobrite it please. If it works I will have to do mine, too. The caps are in a sad state. I can't take any pictures right now, the board is at my parents' place.

[yab8433408]

HAU

[Grond]

Amazing find yab, it's the first time I see them in ANSI!

[Half-Saint]

Curses!!!

[Grond]

Were the keyboards sold as Olivetti in the US as well or rebranded?

[IvanIvanovich]

Oh my! I want those ansi blue doubleshots so badly, gorgeous.

[Half-Saint]

You and me both