IDENTIFY THE KEYBOARD thread
- TheAdmiralty
- Location: Baltimore, MD
- Main keyboard: IBM Model M (1391401)
- Main mouse: Logitech G602
- Favorite switch: Buckling Spring
- DT Pro Member: -
Spoiler:
Just a rubber dome clone of the Model M/F-122? Price is flat out stupid but I'm curious.
- snufflecat
- Location: Norway
- Main keyboard: Model M
- DT Pro Member: -
- mike52787
- Alps Aficionado
- Location: South-West Florida
- Main keyboard: G80-5000HAAUS
- Main mouse: Zowie EC1-A
- Favorite switch: Vintage MX Black
- DT Pro Member: 0166
I think I have seen that somewhere, and yeah I think it was a rubberdome. However there are 122 style layout boards also branded "Computer Lab International" which have mx blacks and mx clones.TheAdmiralty wrote:https://www.ebay.com/itm/NEW-NIB-COMPUT ... SwaEhZJNcHSpoiler:
Just a rubber dome clone of the Model M/F-122? Price is flat out stupid but I'm curious.
- Keybug
- Location: Germany
- Main keyboard: so many!
- Main mouse: Logitech G700s; trackballs suck
- Favorite switch: Kailh box royals, trampoline-modded
- DT Pro Member: 0208
Anyone know what this is? Don't think I've ever seen a white escape key on a vintage board like this. Escape also looks almost BTC-style large, but I think here it's due to the angle of the photo. Thanks.
- Attachments
-
- this.jpg (244.89 KiB) Viewed 5707 times
- Keybug
- Location: Germany
- Main keyboard: so many!
- Main mouse: Logitech G700s; trackballs suck
- Favorite switch: Kailh box royals, trampoline-modded
- DT Pro Member: 0208
Turns out it's a Chicony 5162. I guess no one can say for certain what switches it has, just from the label...
- Attachments
-
- image2.JPG (1.35 MiB) Viewed 5692 times
- Myoth
- Location: Strasbourg
- Main keyboard: IDB60
- Main mouse: EC1-A
- Favorite switch: Cap BS
- DT Pro Member: -
- snufflecat
- Location: Norway
- Main keyboard: Model M
- DT Pro Member: -
My latest catch. It's got vintage mx blacks, but does anyone know what type of contact this is?
Spoiler:
- seebart
- Offtopicthority Instigator
- Location: Germany
- Main keyboard: Rotation
- Main mouse: Steelseries Sensei
- Favorite switch: IBM capacitive buckling spring
- DT Pro Member: 0061
- Contact:
Looks like an RJ45 jack.
- Daniel Beardsmore
- Location: Hertfordshire, England
- Main keyboard: Filco Majestouch 1 (home)/Poker II backlit (work)
- Main mouse: MS IMO 1.1
- Favorite switch: Probably not whatever I wrote here
- DT Pro Member: -
- Contact:
RJ45 is a wiring arrangement. The jack is 8P8C (8 positions, each position being wired up — 8P6C for example would have the two outer connecting strips absent). And that's nowhere near 8P wide. That appears to be 4P4C. (The best-known 4P wiring arrangement is RJ11 for telephones.)
- seebart
- Offtopicthority Instigator
- Location: Germany
- Main keyboard: Rotation
- Main mouse: Steelseries Sensei
- Favorite switch: IBM capacitive buckling spring
- DT Pro Member: 0061
- Contact:
̶L̶o̶o̶k̶s̶ ̶l̶i̶k̶e̶ ̶a̶n̶ ̶R̶J̶4̶5̶ ̶j̶a̶c̶k̶.̶
Looks like a Beardsmore correction.![Laughing :lol:](./images/smilies/icon_lol.gif)
Looks like a Beardsmore correction.
![Laughing :lol:](./images/smilies/icon_lol.gif)
It's better to be corrected than to be wrong.
- snufflecat
- Location: Norway
- Main keyboard: Model M
- DT Pro Member: -
I'll see if I can get a better shot later, maybe that helps? And I guess the only way to get this to work is to make your own adapter?Daniel Beardsmore wrote: RJ45 is a wiring arrangement. The jack is 8P8C (8 positions, each position being wired up — 8P6C for example would have the two outer connecting strips absent). And that's nowhere near 8P wide. That appears to be 4P4C. (The best-known 4P wiring arrangement is RJ11 for telephones.)
- purdobol
- Location: Poland
- Main keyboard: Custom
- Main mouse: MS WMO 1.1A
- Favorite switch: Marquardt Butterfly
- DT Pro Member: -
Depends on the protocol it uses. There's a chance for standard AT, which would only require custom cable RJ45 -> PS/2.
If it's something exotic than teensy (or clone) and custom firmware. Photo of the board could help, the connections sometimes are signed.
- Polecat
- Location: Downstream from Silicon Valley
- Main keyboard: Monterey K104 Industrial Gray
- Main mouse: Logitech Optical
- Favorite switch: Early Alps SKCM
- DT Pro Member: -
Looks more like RJ9. RJ45 (8p8c) is the 8 pin connector used for ethernet. RJ11 (6p4c) is the 4 pin used from telephone to wall. RJ9 (4p4c) is the smaller 4 pin used on telephone handsets (and on some terminal keyboards and early Macs). RJ8 (6p6c) is the 6 pin used on some Televideo keyboards. (edit: corrected RJ8 to RJ9 and added xpxc designations per Mr. Beardmore's absolutely correct definitions)
Last edited by Polecat on 23 Nov 2017, 18:12, edited 1 time in total.
- Myoth
- Location: Strasbourg
- Main keyboard: IDB60
- Main mouse: EC1-A
- Favorite switch: Cap BS
- DT Pro Member: -
soarer's ceonverter works on this, you can check orihalcon's ebay to buy one
https://www.ebay.com/itm/6FT-Soarers-WY ... SwGYVXACHX
I'm pretty sure this is a Wyse clone after all ...
https://www.ebay.com/itm/6FT-Soarers-WY ... SwGYVXACHX
I'm pretty sure this is a Wyse clone after all ...
- seebart
- Offtopicthority Instigator
- Location: Germany
- Main keyboard: Rotation
- Main mouse: Steelseries Sensei
- Favorite switch: IBM capacitive buckling spring
- DT Pro Member: 0061
- Contact:
Polecat wrote:Looks more like RJ9. RJ45 is the 8 pin connector used for ethernet. RJ11 is the 4 pin used from telephone to wall. RJ9 is the smaller 4 pin used on telephone handsets (and on some terminal keyboards and early Macs). RJ8 is the 6 pin used on some Televideo keyboards. (edit: corrected RJ8 to RJ9)
Three posts up vs. double post take your pick.Daniel Beardsmore wrote: RJ45 is a wiring arrangement. The jack is 8P8C (8 positions, each position being wired up — 8P6C for example would have the two outer connecting strips absent). And that's nowhere near 8P wide. That appears to be 4P4C. (The best-known 4P wiring arrangement is RJ11 for telephones.)
-
- Location: Stockholm, Sweden
- DT Pro Member: 0011
Wrong on a few counts. A modular connector is a registered jack only when used for that Registered Jack's particular purpose. There are registered jacks that are not modular connectorsPolecat wrote: Looks more like RJ9. RJ45 is the 8 pin connector used for ethernet. RJ11 is the 4 pin used from telephone to wall. RJ9 is the smaller 4 pin used on telephone handsets (and on some terminal keyboards and early Macs). RJ8 is the 6 pin used on some Televideo keyboards. (edit: corrected RJ8 to RJ9)
It's the same situation as with 6-pin mini-DIN and PS/2. Also, RJ11 uses a 6P2C connector.
#petpeeve
![Razz :P](./images/smilies/icon_razz.gif)
Last edited by Findecanor on 23 Nov 2017, 18:26, edited 1 time in total.
- Polecat
- Location: Downstream from Silicon Valley
- Main keyboard: Monterey K104 Industrial Gray
- Main mouse: Logitech Optical
- Favorite switch: Early Alps SKCM
- DT Pro Member: -
Thanks, edited while being corrected.seebart wrote:Polecat wrote:Looks more like RJ9. RJ45 is the 8 pin connector used for ethernet. RJ11 is the 4 pin used from telephone to wall. RJ9 is the smaller 4 pin used on telephone handsets (and on some terminal keyboards and early Macs). RJ8 is the 6 pin used on some Televideo keyboards. (edit: corrected RJ8 to RJ9)Three posts up vs. double post take your pick.Daniel Beardsmore wrote: RJ45 is a wiring arrangement. The jack is 8P8C (8 positions, each position being wired up — 8P6C for example would have the two outer connecting strips absent). And that's nowhere near 8P wide. That appears to be 4P4C. (The best-known 4P wiring arrangement is RJ11 for telephones.)
![Laughing :lol:](./images/smilies/icon_lol.gif)
Better to be safe and sorry.
- seebart
- Offtopicthority Instigator
- Location: Germany
- Main keyboard: Rotation
- Main mouse: Steelseries Sensei
- Favorite switch: IBM capacitive buckling spring
- DT Pro Member: 0061
- Contact:
- Polecat
- Location: Downstream from Silicon Valley
- Main keyboard: Monterey K104 Industrial Gray
- Main mouse: Logitech Optical
- Favorite switch: Early Alps SKCM
- DT Pro Member: -
If I was any more relaxed I'd be gulping down tall ones. It's only 9 am here, but it must be noon somewhere in the world? Love it that I can be correctly corrected, learn something new, and relearn something I had forgotten over thirty years ago all at the same time.
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
- seebart
- Offtopicthority Instigator
- Location: Germany
- Main keyboard: Rotation
- Main mouse: Steelseries Sensei
- Favorite switch: IBM capacitive buckling spring
- DT Pro Member: 0061
- Contact:
![Surprised :o](./images/smilies/icon_e_surprised.gif)
![Razz :P](./images/smilies/icon_razz.gif)
7:14 PM
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
Yes that's the normal learning curve here regardless of your time-zone...
![Laughing :lol:](./images/smilies/icon_lol.gif)
- Daniel Beardsmore
- Location: Hertfordshire, England
- Main keyboard: Filco Majestouch 1 (home)/Poker II backlit (work)
- Main mouse: MS IMO 1.1
- Favorite switch: Probably not whatever I wrote here
- DT Pro Member: -
- Contact:
Ah, right, RJ11 is 6P2C … the cables I'm thinking of are the UK ADSL cables, which are 6P4C — I'd never noticed that the outer two positions were unused, so I mistook the plug for 4P4C.
Apple's ADB is unusual in that it's one of the rare protocols that uses a plug with the same number of pin positions as there are operational conductors in the cable. Now if only Apple had actually made ADB hot-swap safe — it worked perfectly at the OS level (demonstrated many times), but it was a no-no in terms of the circuitry.
Apple's ADB is unusual in that it's one of the rare protocols that uses a plug with the same number of pin positions as there are operational conductors in the cable. Now if only Apple had actually made ADB hot-swap safe — it worked perfectly at the OS level (demonstrated many times), but it was a no-no in terms of the circuitry.
- seebart
- Offtopicthority Instigator
- Location: Germany
- Main keyboard: Rotation
- Main mouse: Steelseries Sensei
- Favorite switch: IBM capacitive buckling spring
- DT Pro Member: 0061
- Contact:
Just for fun I'll share this "Cherry-Apple" that heymark sent me today:
https://tieba.baidu.com/p/4034770431?sh ... 3344350041
https://tieba.baidu.com/p/4034770431?sh ... 3344350041
- Myoth
- Location: Strasbourg
- Main keyboard: IDB60
- Main mouse: EC1-A
- Favorite switch: Cap BS
- DT Pro Member: -
That looks weird, but a good weirdseebart wrote: Just for fun I'll share this "Cherry-Apple" that heymark sent me today:
https://tieba.baidu.com/p/4034770431?sh ... 3344350041
![Smile :)](./images/smilies/icon_e_smile.gif)
- seebart
- Offtopicthority Instigator
- Location: Germany
- Main keyboard: Rotation
- Main mouse: Steelseries Sensei
- Favorite switch: IBM capacitive buckling spring
- DT Pro Member: 0061
- Contact:
Pretty strange if you ask me but hey why not and if it works then that's quite a unique build.Myoth wrote:That looks weird, but a good weirdseebart wrote: Just for fun I'll share this "Cherry-Apple" that heymark sent me today:
https://tieba.baidu.com/p/4034770431?sh ... 3344350041
- webwit
- Wild Duck
- Location: The Netherlands
- Main keyboard: Model F62
- Favorite switch: IBM beam spring
- DT Pro Member: 0000
- Contact:
Those are Japanese sublegends.
- Tuntematon
- Location: Canada
- DT Pro Member: -